TRACTEL Blocfor 1.8A EVO ESD fall arrest device with M51 and M47 hook - up to 150 kg - 84072

Product description

• Blocfor fall arrest device with ESD technology, suitable for use on terraces. The fall arrest device comply with the CNB/P/11.062 standard and High Capacity Range 150 kg.
• On the Blocfor 1.8A EVO ESD, the ESD fall arrest device is attached to the retractable belt. The belt of the Blocfor 1.8A EVO ESD is attached to the anchor point of the harness via the M47 connector. The Blocfor 1.8A EVO ESD housing is connected to the anchor point on the structure.
• The use of the Blocfor 1.8A according to the DIN 19427 standard is suitable for use in a work basket to protect against a fall from an aerial work platform.
• The total length of the Blocfor 1.8 A DIN including connector should not exceed 1.80 m. In the event of a fall, the maximum impact is 3 kN.
• The height of the anchor point must be at least 35 cm below the handrail at the knee.
• Additional instructions for using the fall arrest device with DIN are included with the downloads.

Key features

• Meets EN 360 and CNB/P/11.060 standard for working on edges with minimum radius of arc of 0.5mm
• Can be used vertically or at an angle of 20° to vertical
• Horizontal use without using an additional line between the end of the strap and the harness
• Can be used in the following fall factors: FACTOR 0 (overhead), FACTOR 1 (shoulder level), FACTOR 2 (foot level)
• Flexible and stronger unwinding system that does not jerk during user movements
• Effective system that locks automatically during a fall, limiting the total drop height
• Includes ESD (Energy System Dissipater) technology allowing the equipment to absorb a fall even when the belt is fully unrolled
• Integrated fall indicator
• Length 1.8 metres, strap material version
• Tyre is wider and stronger
• Lightweight
• Polyamide casing reinforced with ABS fibre
• Standard M47 swivel hook at end of shock absorber