Supplier number:
TEROSON 2563339
|
EAN
4058093025840
Recommended Retail Price
€23.32
20.60
tax incl.
€17.02 excl. VAT (incl. all environmental contributions)
Cold body repairs with Teroson
Practical benefits- Safe work without flame: You rebuild damaged panels without an open flame, protecting adjacent protective coatings and vehicle components.
- Sag-free and no shrinkage: The formula maintains its volume without sagging, letting you reconstruct original panel contours accurately.
- Easy and smooth sanding: Once fully cured, the material sands easily to create a seamless surface ready for final paintwork.
In a nutshell
The right choise forWith Teroson ep 5020 TR, you can repair and rebuild steel and aluminium body panels cold without using an open flame. This 50 ml 2K epoxy tin solder replacement prevents heat distortion while keeping adjacent coatings, paint, and backside corrosion protection fully intact. The sag-resistant formula stays put on vertical panels and cures completely shrink-free, allowing you to reconstruct original body lines and weld seams accurately. With an open working time of around 10 minutes, you have precise control during application, and the fully cured material sands smoothly for a seamless finish before painting.
Product information
Key features according to our expert
- Physical state: Solid
- ADR packing group: III; II
- ADR class: 9; 8
- Net volume: 50 ml
- Principal hazard property: GHS05 Corrosive
- UN number: UN3077; UN3259
- H-statements: H315; H317; H319; H360F; H411; H302; H314; H318; H412
- P-statements: P201; P261; P273; P280; P308 + P313; P260; P301 + P312; P303 + P361 + P353; P305 + P351 + P338; P310
- Hazard class: GHS07 Harmful or irritant; GHS08 Health hazard; GHS09 Environmental hazard; GHS05 Corrosive
Precautionary statements
- P201: Obtain special instructions before use.
- P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
- P273: Avoid release to the environment.
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P308 + P313: IF exposed or concerned: Get medical advice/attention.
- P260: Do not breathe dust/fume/gas/mist/vapours/spray.
- P301 + P312: IF SWALLOWED: Call a POISON CENTER/doctor/… if you feel unwell.
- P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water (or shower).
- P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P310: Immediately call a POISON CENTER/doctor/…
Hazard statements
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H360F: May damage fertility.
- H411: Toxic to aquatic life with long lasting effects.
- H302: Harmful if swallowed.
- H314: Causes severe skin burns and eye damage.
- H318: Causes serious eye damage.
- H412: Harmful to aquatic life with long lasting effects.
All Features
- Physical state
- Solid
- Adr packing group
- III; II
- Adr class
- 9; 8
- Net volume
- 50 ml
- Principal hazard property
- GHS05 Corrosive
- Un number
- UN3077; UN3259
- H-statements
- H315; H317; H319; H360F; H411; H302; H314; H318; H412
- P-statements
- P201; P261; P273; P280; P308 + P313; P260; P301 + P312; P303 + P361 + P353; P305 + P351 + P338; P310
- Hazard class
- GHS07 Harmful or irritant; GHS08 Health hazard; GHS09 Environmental hazard; GHS05 Corrosive
- Brand TEROSON
- EAN 4058093025840
- Supplier number TEROSON 2563339
Frequently asked questions about this product
Answered by specialists
- What is Teroson EP 5020 TR used for?
- It is used for cold rebuilding and reshaping steel or aluminium automotive body parts as a tin solder replacement.
- What is the benefit over traditional tin soldering?
- It requires no open flame, protecting nearby coatings, paint, and backside corrosion protection.
- What is the working time of this epoxy?
- The open working time is 10 minutes or less at 22°C.
- When can the repaired area be sanded?
- It is sandable after 2.5 hours at 23°C, or after 15 minutes when heat-cured at 60°C.
- Does the material shrink while curing?
- No, this epoxy formulation is completely shrink-free and maintains its shape.
Questions about this product?
Our product specialists are happy to help with any questions about this range. Call, email or chat with us!
Chat with us