r: 03050099 p: 17.52 pid: 88629 b: RENOLD q: 0 st: lt: 8 ean: 0673766006854 sr: RENOLD 10B2S30I sr_no_br: 10B2S30I sr_no_br_cl: 10B2S30I sr_cl: RENOLD10B2S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Thickness (inner plate) 1,55 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 1,69 kg/m Length (pin) 35,4 mm Height 2,5 Thickness (outer plate) 1,55 mm Plate height 14,6 mm Type (ISO/ANSI) 10B-2 Version (link) Duplex Diameter (pin) 5,08 mm Diameter (roller) 10,16 mm Breaking strength 44500 N Inside width 9,65 mm n: RENOLD 10B2S30I reducing link BLUE 10b-2 - duplex 5/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 10b-2 - duplex 5/8 inch kpn: 10B2S30I kpn_dash: kpn_clear: 10B2S30I bkpn: RENOLD 10B2S30I bkpn_clear: RENOLD 10B2S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 10B2S30I sr_ns: RENOLD10B2S30I
r: 03050115 p: 16.818 pid: 87826 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 40A1S30I sr_no_br: 40A1S30I sr_no_br_cl: 40A1S30I sr_cl: RENOLD40A1S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Thickness (inner plate) 1,55 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 0,6 kg/m Length (pin) 16,4 mm Height 2,1 Thickness (outer plate) 1,55 mm Plate height 11,2 mm Type (ISO/ANSI) 40-1 Version (link) Simplex Diameter (pin) 3,97 mm Diameter (roller) 7,92 mm Breaking strength 13900 N Inside width 7,85 mm n: RENOLD 40A1S30I reducing link BLUE 40-1 - simplex 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 40-1 - simplex 1/2 inch kpn: 40A1S30I kpn_dash: kpn_clear: 40A1S30I bkpn: RENOLD 40A1S30I bkpn_clear: RENOLD 40A1S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 40A1S30I sr_ns: RENOLD40A1S30I
r: 03050013 p: 16.487 pid: 87800 b: RENOLD q: 19 st: 1 lt: 1 ean: 0673766034826 sr: RENOLD 08B2S12I sr_no_br: 08B2S12I sr_no_br_cl: 08B2S12I sr_cl: RENOLD08B2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Thickness (inner plate) 1,55 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 1,38 kg/m Length (pin) 30,4 mm Height 2 Thickness (outer plate) 1,55 mm Plate height 11,7 mm Type (ISO/ANSI) 08B-2 Version (link) Duplex Diameter (pin) 4,45 mm Diameter (roller) 8,51 mm Breaking strength 31100 N Inside width 7,75 mm n: RENOLD 08B2S12I reducer BLUE 08b-2 - duplex 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 08b-2 - duplex 1/2 inch kpn: 08B2S12I kpn_dash: kpn_clear: 08B2S12I bkpn: RENOLD 08B2S12I bkpn_clear: RENOLD 08B2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 08B2S12I sr_ns: RENOLD08B2S12I
r: 02096815 p: 16.363 pid: 89714 b: RENOLD q: 0 st: lt: 15 ean: 0673766042371 sr: RENOLD 25A1S30I sr_no_br: 25A1S30I sr_no_br_cl: 25A1S30I sr_cl: RENOLD25A1S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/4 inch; 6,35 mm Thickness (inner plate) 0,76 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 0,12 kg/m Length (pin) 7,9 mm Height 1,2 Thickness (outer plate) 0,76 mm Plate height 5,9 mm Type (ISO/ANSI) 25-1 Version (link) Simplex Diameter (pin) 2,3 mm Diameter (roller) 3,3 mm Breaking strength 3500 N Inside width 3,1 mm n: RENOLD 25A1S30I reduction gear unit BLUE 25-1 - simplex 1/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reduction gear unit BLUE 25-1 - simplex 1/4 inch kpn: 25A1S30I kpn_dash: kpn_clear: 25A1S30I bkpn: RENOLD 25A1S30I bkpn_clear: RENOLD 25A1S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 25A1S30I sr_ns: RENOLD25A1S30I
r: 03050012 p: 15.867 pid: 89797 b: RENOLD q: 17 st: 1 lt: 1 ean: 0673766034802 sr: RENOLD 06B2S12I sr_no_br: 06B2S12I sr_no_br_cl: 06B2S12I sr_cl: RENOLD06B2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Thickness (inner plate) 1,29 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 0,78 kg/m Length (pin) 23 mm Height 1,3 Thickness (outer plate) 1,04 mm Plate height 8,2 mm Type (ISO/ANSI) 06B-2 Version (link) Duplex Diameter (pin) 3,28 mm Diameter (roller) 6,35 mm Breaking strength 16900 N Inside width 5,72 mm n: RENOLD 06B2S12I reducer BLUE 06b-2 - duplex 3/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 06b-2 - duplex 3/8 inch kpn: 06B2S12I kpn_dash: kpn_clear: 06B2S12I bkpn: RENOLD 06B2S12I bkpn_clear: RENOLD 06B2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 06B2S12I sr_ns: RENOLD06B2S12I
r: 03050074 p: 15.867 pid: 88199 b: RENOLD q: 4 st: 1 lt: 1 ean: 0673766006441 sr: RENOLD 06B2S30I sr_no_br: 06B2S30I sr_no_br_cl: 06B2S30I sr_cl: RENOLD06B2S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Thickness (inner plate) 1,29 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 0,78 kg/m Length (pin) 23 mm Height 1,3 Thickness (outer plate) 1,04 mm Plate height 8,2 mm Type (ISO/ANSI) 06B-2 Version (link) Duplex Diameter (pin) 3,28 mm Diameter (roller) 6,35 mm Breaking strength 16900 N Inside width 5,72 mm n: RENOLD 06B2S30I reducer BLUE 06b-2 - duplex 3/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 06b-2 - duplex 3/8 inch kpn: 06B2S30I kpn_dash: kpn_clear: 06B2S30I bkpn: RENOLD 06B2S30I bkpn_clear: RENOLD 06B2S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 06B2S30I sr_ns: RENOLD06B2S30I
r: 03050071 p: 15.661 pid: 87812 b: RENOLD q: 13 st: 1 lt: 1 ean: 0673766001668 sr: RENOLD GY08B1S30I sr_no_br: GY08B1S30I sr_no_br_cl: GY08B1S30I sr_cl: RENOLDGY08B1S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Thickness (inner plate) 1,55 mm Product line Renold Synergy Number of the connecting link 30 Weight (kg/m) 0,7 kg/m Length (pin) 16,5 mm Height 2 Thickness (outer plate) 1,55 mm Plate height 11,7 mm Type (ISO/ANSI) 08B-1 Version (link) Simplex Diameter (pin) 4,45 mm Diameter (roller) 8,51 mm Breaking strength 17800 N Inside width 7,75 mm n: RENOLD GY08B1S30I reducer SYNERGY 08b-1 - simplex 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 08b-1 - simplex 1/2 inch kpn: GY08B1S30I kpn_dash: kpn_clear: GY08B1S30I bkpn: RENOLD GY08B1S30I bkpn_clear: RENOLD GY08B1S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY08B1S30I sr_ns: RENOLDGY08B1S30I
r: 02096824 p: 15.173 pid: 88573 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 35A1S12I sr_no_br: 35A1S12I sr_no_br_cl: 35A1S12I sr_cl: RENOLD35A1S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Thickness (inner plate) 1,29 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 0,35 kg/m Length (pin) 12 mm Height 1,7 Thickness (outer plate) 1,29 mm Plate height 8,6 mm Type (ISO/ANSI) 35-1 Version (link) Simplex Diameter (pin) 3,59 mm Diameter (roller) 5,08 mm Breaking strength 7900 N Inside width 4,68 mm n: RENOLD 35A1S12I reducing link BLUE 35-1 - simplex 3/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 35-1 - simplex 3/8 inch kpn: 35A1S12I kpn_dash: kpn_clear: 35A1S12I bkpn: RENOLD 35A1S12I bkpn_clear: RENOLD 35A1S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 35A1S12I sr_ns: RENOLD35A1S12I
r: 03050070 p: 14.214 pid: 89813 b: RENOLD q: 25 st: 1 lt: 1 ean: 6623900916048 sr: RENOLD GY06B1S30I sr_no_br: GY06B1S30I sr_no_br_cl: GY06B1S30I sr_cl: RENOLDGY06B1S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Thickness (inner plate) 1,29 mm Product line Renold Synergy Number of the connecting link 30 Weight (kg/m) 0,39 kg/m Length (pin) 12,5 mm Height 1,3 Thickness (outer plate) 1,04 mm Plate height 8,2 mm Type (ISO/ANSI) 06B-1 Version (link) Simplex Diameter (pin) 3,28 mm Diameter (roller) 6,35 mm Breaking strength 8900 N Inside width 5,72 mm n: RENOLD GY06B1S30I reducer SYNERGY 06b-1 - simplex 3/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 06b-1 - simplex 3/8 inch kpn: GY06B1S30I kpn_dash: kpn_clear: GY06B1S30I bkpn: RENOLD GY06B1S30I bkpn_clear: RENOLD GY06B1S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY06B1S30I sr_ns: RENOLDGY06B1S30I
r: 03050065 p: 13.647 pid: 87810 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 10B1S30I sr_no_br: 10B1S30I sr_no_br_cl: 10B1S30I sr_cl: RENOLD10B1S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Thickness (inner plate) 1,55 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 0,96 kg/m Length (pin) 18,8 mm Height 2,5 Thickness (outer plate) 1,55 mm Plate height 14,6 mm Type (ISO/ANSI) 10B-1 Version (link) Simplex Diameter (pin) 5,08 mm Diameter (roller) 10,16 mm Breaking strength 22200 N Inside width 9,65 mm n: RENOLD 10B1S30I reducing link BLUE 10b-1 - simplex 5/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 10b-1 - simplex 5/8 inch kpn: 10B1S30I kpn_dash: kpn_clear: 10B1S30I bkpn: RENOLD 10B1S30I bkpn_clear: RENOLD 10B1S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 10B1S30I sr_ns: RENOLD10B1S30I
r: 02096858 p: 12.07 pid: 71645 b: RENOLD q: 14 st: 1 lt: 1 ean: 6623900537083 sr: RENOLD 60A1S12I sr_no_br: 60A1S12I sr_no_br_cl: 60A1S12I sr_cl: RENOLD60A1S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Thickness (inner plate) 2,45 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 1,47 kg/m Length (pin) 25,3 mm Height 2,6 Thickness (outer plate) 2,45 mm Plate height 17,5 mm Type (ISO/ANSI) 60-1 Version (link) Simplex Diameter (pin) 5,94 mm Diameter (roller) 11,91 mm Breaking strength 31300 N Inside width 12,57 mm n: RENOLD 60A1S12I reducing link BLUE 60-1 - simplex 3/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 60-1 - simplex 3/4 inch kpn: 60A1S12I kpn_dash: kpn_clear: 60A1S12I bkpn: RENOLD 60A1S12I bkpn_clear: RENOLD 60A1S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 60A1S12I sr_ns: RENOLD60A1S12I
r: 03050235 p: 10.413 pid: 87878 b: RENOLD q: 0 st: lt: 15 ean: 6623900919926 sr: RENOLD 111044S30I sr_no_br: 111044S30I sr_no_br_cl: 111044S30I sr_cl: RENOLD111044S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Thickness (inner plate) 1,13 mm Product line Renold Synergy Number of the connecting link 30 Weight (kg/m) 0,3 kg/m Length (pin) 9,8 mm Height 2 Thickness (outer plate) 0,98 mm Plate height 9,6 mm Version (link) Simplex Diameter (pin) 4,09 mm Diameter (roller) 7,75 mm Breaking strength 8900 N Inside width 3,3 mm n: RENOLD 111044S30I reducer SYNERGY 081 - simplex 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 081 - simplex 1/2 inch kpn: 111044S30I kpn_dash: kpn_clear: 111044S30I bkpn: RENOLD 111044S30I bkpn_clear: RENOLD 111044S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 111044S30I sr_ns: RENOLD111044S30I
r: 02096838 p: 10.29 pid: 89722 b: RENOLD q: 35 st: 1 lt: 1 ean: 6623900532699 sr: RENOLD 40A1S12I sr_no_br: 40A1S12I sr_no_br_cl: 40A1S12I sr_cl: RENOLD40A1S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Thickness (inner plate) 1,55 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 0,6 kg/m Length (pin) 16,4 mm Height 2,1 Thickness (outer plate) 1,55 mm Plate height 11,2 mm Type (ISO/ANSI) 40-1 Version (link) Simplex Diameter (pin) 3,97 mm Diameter (roller) 7,92 mm Breaking strength 13900 N Inside width 7,85 mm n: RENOLD 40A1S12I reducing link BLUE 40-1 - simplex 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 40-1 - simplex 1/2 inch kpn: 40A1S12I kpn_dash: kpn_clear: 40A1S12I bkpn: RENOLD 40A1S12I bkpn_clear: RENOLD 40A1S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 40A1S12I sr_ns: RENOLD40A1S12I
r: 03050066 p: 9.29 pid: 90014 b: RENOLD q: 17 st: 1 lt: 1 ean: 6623901082001 sr: RENOLD 12B1S30I sr_no_br: 12B1S30I sr_no_br_cl: 12B1S30I sr_cl: RENOLD12B1S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Thickness (inner plate) 1,81 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 1,22 kg/m Length (pin) 21,9 mm Height 2,6 Thickness (outer plate) 1,81 mm Plate height 16 mm Type (ISO/ANSI) 12B-1 Version (link) Simplex Diameter (pin) 5,72 mm Diameter (roller) 12,07 mm Breaking strength 28900 N Inside width 11,68 mm n: RENOLD 12B1S30I reducing link BLUE 12b-1 - simplex 3/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 12b-1 - simplex 3/4 inch kpn: 12B1S30I kpn_dash: kpn_clear: 12B1S30I bkpn: RENOLD 12B1S30I bkpn_clear: RENOLD 12B1S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 12B1S30I sr_ns: RENOLD12B1S30I
r: 03050005 p: 9.29 pid: 89785 b: RENOLD q: 41 st: 1 lt: 1 ean: 0673766034864 sr: RENOLD 12B1S12I sr_no_br: 12B1S12I sr_no_br_cl: 12B1S12I sr_cl: RENOLD12B1S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Thickness (inner plate) 1,81 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 1,22 kg/m Length (pin) 21,9 mm Height 2,6 Thickness (outer plate) 1,81 mm Plate height 16 mm Type (ISO/ANSI) 12B-1 Version (link) Simplex Diameter (pin) 5,72 mm Diameter (roller) 12,07 mm Breaking strength 28900 N Inside width 11,68 mm n: RENOLD 12B1S12I reducing link BLUE 12b-1 - simplex 3/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 12b-1 - simplex 3/4 inch kpn: 12B1S12I kpn_dash: kpn_clear: 12B1S12I bkpn: RENOLD 12B1S12I bkpn_clear: RENOLD 12B1S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 12B1S12I sr_ns: RENOLD12B1S12I
r: 03050001 p: 8.68 pid: 88598 b: RENOLD q: 4 st: 1 lt: 1 ean: 6623901217595 sr: RENOLD 05B1S30I sr_no_br: 05B1S30I sr_no_br_cl: 05B1S30I sr_cl: RENOLD05B1S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 8 mm Thickness (inner plate) 0,76 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 0,18 kg/m Length (pin) 8,6 mm Height 1,5 Thickness (outer plate) 0,76 mm Plate height 7,11 mm Type (ISO/ANSI) 05B-1 Version (link) Simplex Diameter (pin) 2,31 mm Diameter (roller) 5 mm Breaking strength 4400 N Inside width 3 mm n: RENOLD 05B1S30I reducer BLUE 05b-1 - simplex 5/16 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 05b-1 - simplex 5/16 inch kpn: 05B1S30I kpn_dash: kpn_clear: 05B1S30I bkpn: RENOLD 05B1S30I bkpn_clear: RENOLD 05B1S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 05B1S30I sr_ns: RENOLD05B1S30I
r: 02096700 p: 7.957 pid: 88569 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 111043S30I sr_no_br: 111043S30I sr_no_br_cl: 111043S30I sr_cl: RENOLD111043S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Thickness (inner plate) 1,13 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 0,35 kg/m Length (pin) 11,4 mm Height 2 Thickness (outer plate) 0,98 mm Plate height 9,6 mm Version (link) Simplex Diameter (pin) 4,09 mm Diameter (roller) 7,75 mm Breaking strength 8900 N Inside width 4,88 mm n: RENOLD 111043S30I reducing link BLUE 111043 - simplex 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 111043 - simplex 1/2 inch kpn: 111043S30I kpn_dash: kpn_clear: 111043S30I bkpn: RENOLD 111043S30I bkpn_clear: RENOLD 111043S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 111043S30I sr_ns: RENOLD111043S30I
r: 03050003 p: 7.92 pid: 88187 b: RENOLD q: 95 st: 1 lt: 1 ean: 0673766034819 sr: RENOLD 08B1S12I sr_no_br: 08B1S12I sr_no_br_cl: 08B1S12I sr_cl: RENOLD08B1S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Thickness (inner plate) 1,55 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 0,7 kg/m Length (pin) 16,5 mm Height 2 Thickness (outer plate) 1,55 mm Plate height 11,7 mm Type (ISO/ANSI) 08B-1 Version (link) Simplex Diameter (pin) 4,45 mm Diameter (roller) 8,51 mm Breaking strength 17800 N Inside width 7,75 mm n: RENOLD 08B1S12I reducer BLUE 08b-1 - simplex 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 08b-1 - simplex 1/2 inch kpn: 08B1S12I kpn_dash: kpn_clear: 08B1S12I bkpn: RENOLD 08B1S12I bkpn_clear: RENOLD 08B1S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 08B1S12I sr_ns: RENOLD08B1S12I
r: 03050002 p: 7.13 pid: 88601 b: RENOLD q: 40 st: 1 lt: 1 ean: 0673766034765 sr: RENOLD 06B1S12I sr_no_br: 06B1S12I sr_no_br_cl: 06B1S12I sr_cl: RENOLD06B1S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Thickness (inner plate) 1,29 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 0,39 kg/m Length (pin) 12,5 mm Height 1,3 Thickness (outer plate) 1,04 mm Plate height 8,2 mm Type (ISO/ANSI) 06B-1 Version (link) Simplex Diameter (pin) 3,28 mm Diameter (roller) 6,35 mm Breaking strength 8900 N Inside width 5,72 mm n: RENOLD 06B1S12I reducer BLUE 06b-1 - simplex 3/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 06b-1 - simplex 3/8 inch kpn: 06B1S12I kpn_dash: kpn_clear: 06B1S12I bkpn: RENOLD 06B1S12I bkpn_clear: RENOLD 06B1S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 06B1S12I sr_ns: RENOLD06B1S12I
r: 03050063 p: 7.13 pid: 89809 b: RENOLD q: 9 st: 1 lt: 1 ean: 0673766034772 sr: RENOLD 06B1S30I sr_no_br: 06B1S30I sr_no_br_cl: 06B1S30I sr_cl: RENOLD06B1S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Thickness (inner plate) 1,29 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 0,39 kg/m Length (pin) 12,5 mm Height 1,3 Thickness (outer plate) 1,04 mm Plate height 8,2 mm Type (ISO/ANSI) 06B-1 Version (link) Simplex Diameter (pin) 3,28 mm Diameter (roller) 6,35 mm Breaking strength 8900 N Inside width 5,72 mm n: RENOLD 06B1S30I reducer BLUE 06b-1 - simplex 3/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 06b-1 - simplex 3/8 inch kpn: 06B1S30I kpn_dash: kpn_clear: 06B1S30I bkpn: RENOLD 06B1S30I bkpn_clear: RENOLD 06B1S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 06B1S30I sr_ns: RENOLD06B1S30I
