PFERD TRE 1016/6 STEEL HC-FEP high-efficiency carbide burrs drop shape 10x16mm 6mm HICOAT for steel - 21134990

€85.84

Delivery by DHL

Product information

Product description

PFERD Tungsten carbide high-performance burr STEEL oval TRE dia. 10x16 mm shank dia. 6 mm HICOAT for steel

Characteristics

High-performance cut STEEL with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance
It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant
It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs
Oval burr according to DIN 8032

Advantages:

The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Key features according to our expert

Diameter: 10 mm
Shape (burr cutter): Teardrop (E)
Cutting length: 16 mm
Shank type: Cylindrical
Shank size (milling cutter): 6 mm

Specifications / All features

Brand: PFERD
03235591
EAN: 4007220221808
Supplier number: PFERD 21134990

Diameter: 10 mm
Shape (burr cutter): Teardrop (E)
Cutting length: 16 mm
Shank type: Cylindrical
Shank size (milling cutter): 6 mm
Workable materials 9: Heat-resistant materials
Workable materials 5: Cobalt-based alloys
Workable materials 1: Black annealed cast iron (GTS, GJMB)
Processing tasks: Obtaining cut-outs
Processing tasks 3: Milling
Workable materials 12: Steel
Workable materials 16: Steel up to 700 N/mm² (< 220 HB)
Processing tasks 1: Deburring
Processing tasks 5: Machining of surfaces
Rpm up to, hardened refined steels above 1,200 n/mm²: 29000
Workable materials 4: Cast steel
Workable materials 3: Cast iron
Workable materials 14: Steel up to 1,200 N/mm² (< 38 HRC)
Workable materials 7: Aluminium alloys hard
Workable materials 10: Nickel-based alloys (e.g. Inconel and Hastelloy)
Rpm of, steels up to 1,200 n/mm²: 14000
Gearing: STEEL HC-FEP
Rpm up to, steels up to 1,200 n/mm²: 29000
ø outside metric: 10
Workable materials 17: Tool steel
Workable materials 8: Hardened, heat-treated steels above 1,200 N/mm² (< 38 HRC)
Workable materials 2: High-speed steel
Workable materials: Annealed cast iron
Workable materials 6: Grey/lamellar/nodular cast iron (GG/GJL, GGG/GJS)
Length, toothed: 16
Processing tasks 2: Levelling
Workable materials 13: Steel, cast steel
Processing tasks 6: welding
Workable materials 18: White annealed cast iron (GTW, GJMW)
Workable materials 11: Stainless steel (INOX)
Workable materials 15: Steel above 700 N/mm² (> 220 HB)
Corner execution radius: 4
Length, total: 56
Processing tasks 4: Milling out
ø shaft metric: 6
Rpm of, hardened refined steels above 1,200 n/mm²: 14000