Product description
- PFERD Tungsten carbide high-performance burr MICRO conical pointed SKM dia. 03x07 mm shank dia. 3 mm finishing
Characteristics
- Tungsten carbide burrs with the MICRO cut are specifically designed for finishing and are used in areas in which mounted grinding points are used for example
- They offer a higher stock removal rate and produce a high surface quality, particularly compared with conventionally milled surfaces
- They also operate with low vibration and little noise
- They maintain their geometry over their entire tool life, and are well-suited to manual and machine applications
- Almost all materials up to a hardness of 68 HRC can be machined
- Conical pointed burr according to DIN 8032, flattened tip
Advantages:
- High surface quality.
- Unlike with mounted grinding points, there is no change in geometry due to wear and tear.
- Use on almost all materials up to 68 HRC.
- The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.