Product description
- PFERD Deburring brush crimped RBU dia. 250x60x50.8 mm hole steel cord wire dia. 0.35 mm stationary
Characteristics
- Particularly suitable for deburring pipes, cut edges and small parts on stationary machines
- Steel wire is the most common filament material
- Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring
- PFERD special wire has high tensile strength and bending fatigue strength
- This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications
- Steel wire withstands temperatures up to 300 °C
- The filament material of this brush is a cord wire (LIT)
- This is a stranded, brass-plated steel wire
- This special wire construction with cord wire filament is particularly suitable for heavy-duty brushing and aggressive brushing
Advantages:
- Individual check for imbalance guarantees smooth running.
- Maximum tool life thanks to high filament density.
- Long tool life through use of PFERD special wire.
- Creates fine surfaces.
Key features according to our expert
-
Brush diameter: 250 mm
-
Connection type (machine): Bore
-
Material (brush filament): Brass-coated steel wire
-
Wire thickness: 0,35 mm
-
Twisted: No
-
Thickness: 60 mm
-
Max. no-load speed: 3600 rpm
-
Connection size (machine): 50,8 mm
Specifications / All features
-
Brand:
PFERD
-
04023703
-
EAN:
4007220807118
-
Supplier number:
PFERD 43506716
- Brush diameter
- 250 mm
- Connection type (machine)
- Bore
- Material (brush filament)
- Brass-coated steel wire
- Wire thickness
- 0,35 mm
- Twisted
- No
- Thickness
- 60 mm
- Max. no-load speed
- 3600 rpm
- Connection size (machine)
- 50,8 mm
- Filling material
- Steel wire (LIT ST)
- Processing tasks 3
- Removing oxide layers
- ø shaft hole
- 50.8
- Length, trim
- 50
- Processing tasks 1
- Deburring
- Workable materials 3
- Steel, cast steel
- Processing tasks 5
- Roughening
- Max. rpm
- 3600
- ø outside metric
- 250
- Workable materials 1
- Cast steel
- ø topping material
- 0.35
- Rpm, opt., to
- 2700
- Processing tasks
- Cleaning
- ø shaft hole, max.
- 100
- Workable materials 5
- Steel up to 1,200 N/mm² (< 38 HRC)
- Workable materials 4
- Steel grades with hardness > 54 HRC
- Width metric
- 60
- Processing tasks 4
- Paint removal
- Recording system
- Shaft hole
- Processing tasks 2
- Derusting
- Workable materials 2
- Elastomer
- Workable materials 6
- Wood
- Workable materials
- Cast iron
- Rpm, opt., of
- 1800
