Choose your filter
Filter
Categories
Brand
Stocked items only
Price excl. VAT
to €
Flash point
Physical state
Net volume
Packaging
Relative density
Locking strength

Buy a Gift Card

Gift Card

Thread locking in low, medium and high strength

A threadlocker is an anaerobic adhesive that you apply to the thread and that cures as soon as it sits between metal and loses contact with air. The filled space between bolt and nut stops the joint vibrating loose and keeps moisture out at the same time, so the fastener does not seize with corrosion. That makes it standard in machine building, transport and maintenance, wherever a secured bolt cannot be covered by a lock washer or a castle nut.

The choice comes down to strength. Low strength is meant for small bolts and set screws that have to come apart again with hand tools. Medium strength is the common choice for general use: the joint is secured but still releases with normal tools. High strength is for bolts that have to stay put and only release after heating. Look as well at gap fill, cure time and whether the product needs an activator on passive metals such as stainless steel.

Bottles of 10, 50 and 250 ml cover both occasional use and the workbench. Related products sit under adhesives and sealants.

loctite_1335906

LOCTITE 270 high-strength threadlocker (250 ml bottle) - 1335906

  • Net volume: 250 ml
  • P-statements: P261; P273; P280; P302 + P352; P333 + P313; P337 + P313
  • Relative density: 1,1
On stock, immediately available.
Recommended Retail Price €256.00
202.60
€167.44 excl. VAT
⚠️
Connection lost
Oops! It looks like you lost your connection. Page was automaticaly reload.