Festool clamping tools

Festool clamping tools hold a guide rail or workpiece in place while you saw or rout. Joiners and interior fitters use these clamps to fix an FS/2 rail to a board so it cannot shift during the cut.

The range has three kinds of clamp. FSZ screw clamps tighten with a threaded spindle; they are sold in pairs and come in a short and a long version, which you choose by the thickness of the workpiece. The FSZ 120 fits the FS/2, FS/2-KP and FSK rails and the MFT multifunction table. FS-RAPID quick-release clamps lock and release in one movement, which saves time when you make many cuts in a row; there is a right-hand and a left-hand version, so you can clamp on both sides of the rail.

The FS-EZ 150/2 one-hand screw clamp of 310 mm works with one hand while the other holds the rail or workpiece in position. It also comes as a pair. On every clamp, check the rail type in the product name: FS/2 or FS/2-KP. These clamps belong to Festool clamping technology, alongside the other clamping equipment.