r: 03035925 p: 346.942 pid: 158506 b: LAMELLO q: 0 st: lt: 15 ean: 7640149930306 sr: LAMELLO 145373 sr_no_br: 145373 sr_no_br_cl: 145373 sr_cl: LAMELLO145373 sr_dash: sold: 346.942 p_range: none type: standard act: 1 avo: 1 av: Width 19 mm Thickness 9,7 mm Number per box 300 PR Length 52 mm n: LAMELLO Clamex P-10 demountable cabinet connectors (300 pairs) - 145373 cn: BISCUIT cn2: BISCUIT cn_clear: BISCUIT d: Product description Removable furniture connector, installed in seconds For mitre joints from 15 mm and butt joints from 12 mm material thickness Aesthetic appearance with the barely visible 6 mm drill hole All-rounder for all corner and mitre joints from 22.5° to 180 Ideal for thin materials, mitres, wooden drawers, open shelves Clamex P-10 is a demountable furniture connector that is slid into the interlocking workpiece within seconds. Through an access opening, the Clamex P-10 is powerfully connected and released via a lever just like an eccentric joiner. Compared to the Clamex P-14, the Clamex P-10 has a groove depth of only 10 mm and can therefore be used for thinner materials. The furniture joiner is especially ideal for mitre joints and for sharp corners. Like the larger Clamex P-14, the Clamex P-10 also requires an access hole only 6 mm in diameter for operation. Combined with its small size, the furniture connector enables aesthetic furniture designs in thin material thicknesses with almost completely concealed joints and this in many corners. The Clamex P-10 does not require glue, saving valuable time in the production process. The P-System grooves are manufactured either with the groove milling machine Zeta P2 or with a CNC machine. The connectors are then slid into the grooves within seconds, the workpieces are assembled and powerfully joined using levers. There is no need to wait and an assembled workpiece can immediately be further processed or prepared for shipment. Applications Removable connecting fittings for sheet materials in furniture construction Glueing aid for mitred joints or corners that are difficult to tension Concealed mitred joints in plywood from 15 mm or chipboard from 16 mm Joining of wooden drawers from 12 mm thick In kitchen construction in tall cabinets, frame constructions or open shelves In furniture construction for high-quality furniture with mitred joints or unusual angles, wine racks or bookcases. Dummy joints from a material thickness of 12 mm Mitre joints from a material thickness of 15 mm Features Dismountable: Always detachable with the rotating lever Aesthetic: the small, barely visible opening (Ø = 6 mm) serves to open and close the connector Low milling depth: Minimum milling depth with maximum tensile strength Stackable: Workpieces with pre-assembled fittings remain stackable, making them easy to store or transport Versatile: the small depth of the connector allows mitre cuts of 22.5 to 180°, such as for surface, corner and partition wall joints ds: dsc: kts: demountable cabinet connectors (300 pairs) kpn: Clamex P-10 kpn_dash: Clamex P kpn_clear: ClamexP10 bkpn: LAMELLO Clamex P-10 bkpn_clear: LAMELLO ClamexP10 c_path: Home / Fasteners and machine components / Fasteners / Wood joints / Biscuit | Home / Our brands / Lamello / Lamello fasteners and machine components / Lamello fasteners / Lamello wood joints / Lamello biscuit sr_no_br_cl_ns: 145373 sr_ns: LAMELLO145373
r: 02555625 p: 37.024 pid: 136937 b: DEWALT q: 0 st: lt: 18 ean: 5035048025383 sr: DEWALT DT3932-QZ sr_no_br: DT3932-QZ sr_no_br_cl: DT3932QZ sr_cl: DEWALTDT3932QZ sr_dash: DEWALT DT3932 sold: 222.144 p_range: none type: standard act: 1 avo: 1 av: n: DEWALT DT3932-QZ slats size 20 for material from 19 mm (1000 pcs.) cn: BISCUIT cn2: BISCUIT cn_clear: BISCUIT d: Product description Slats Features Blades for DEWALT blade cutters ds: DeWALT Power Month at Klium - Maximum savings! This DeWALT tool is part of the DeWALT Power Month at Klium. What does this mean? Spend €350 excl. VAT on DeWALT products and receive a free XR 18V 5.0Ah battery instantly (Klium only - automatically added to your shopping cart). Offer valid from 01.08.2026 through 31.08.2026 or while stocks last. Once it's gone, it's gone. dsc: kts: slats size 20 for material from 19 mm (1000 pcs.) kpn: DT3932-QZ kpn_dash: DT3932 kpn_clear: DT3932QZ bkpn: DEWALT DT3932-QZ bkpn_clear: DEWALT DT3932QZ c_path: Home / Fasteners and machine components / Fasteners / Wood joints / Biscuit | Home / Our brands / Dewalt / Dewalt fasteners and machine components / Dewalt fasteners / Dewalt wood joints / Dewalt biscuit sr_no_br_cl_ns: DT3932QZ sr_ns: DEWALTDT3932-QZ
r: 03167599 p: 215.537 pid: 128608 b: LAMELLO q: 0 st: lt: 15 ean: 7640149932164 sr: LAMELLO 145303 sr_no_br: 145303 sr_no_br_cl: 145303 sr_cl: LAMELLO145303 sr_dash: sold: 215.537 p_range: none type: standard act: 1 avo: 1 av: n: LAMELLO Bisco P14 alignment slate for P-system grooves (1000 pcs) - 145303 cn: BISCUIT cn2: BISCUIT cn_clear: BISCUIT d: Product description Plastic slats for Clamex P and Tenso P Align furniture parts flush against each other with Clamex P Check furniture for quality with Bisco P before gluing with Tenso P All corner and mitre joints from 22.5° to 180° Bisco P-10 from material thickness 12 mm, Bisco P-14 from 16 mm Bisco P is a plastic lamella. The alignment slat fits into the P-System groove 7 mm wide, but is not anchored together like Clamex P. Instead, it clips into the groove due to its surface structure. It can be used as a wooden slat with wood glue as a fixed joint. Bisco P is used in combination with Clamex P when only every second connector needs to exert tensioning force and between them an alignment element for joint alignment suffices as an invisible and cost-effective alternative. Another application is use as a dry joint before joining a workpiece with Tenso P and adhesive. The tensile strength of Tenso P is very high and can require a lot of force during disassembly depending on the angle of the workpieces. It is therefore advisable to check the precision of the machining operations with Bisco P. Afterwards, Bisco is simply removed from the grooves, replaced with Tenso P, adhesive is applied and the workpieces are assembled. Bisco P-14 is used in combination with Clamex P-14 or Tenso P-14, Bisco P-10 with size P-10 connectors. Applications Combination with Clamex P or Tenso P in furniture construction Applications analogous to the original Lamello wooden slat Size P10: butt joints from a material thickness of 12 mm, mitre joints from a material thickness of 18 mm Size P14: butt joints from a material thickness of 15 mm, mitre joints from a material thickness of 18 mm Features Flexible combining: In combination with Clamex or Tenso, ideal for ensuring that the furniture is properly aligned. Ideal for joints before gluing or joining Low milling depth: Minimum milling depth with maximum tensile strength Sliding tolerance in the profile groove: With the P-System, both workpieces can be aligned perfectly evenly Versatile: The small depth of the joiner allows mitres of 22.5 to 180°, such as for surface, corner and partition wall joints Flush alignment: The large sliding tolerance enables perfect flat alignment of workpieces ds: dsc: kts: alignment slate for P-system grooves (1000 pcs) kpn: Bisco P14 kpn_dash: kpn_clear: BiscoP14 bkpn: LAMELLO Bisco P14 bkpn_clear: LAMELLO BiscoP14 c_path: Home / Fasteners and machine components / Fasteners / Wood joints / Biscuit | Home / Our brands / Lamello / Lamello fasteners and machine components / Lamello fasteners / Lamello wood joints / Lamello biscuit sr_no_br_cl_ns: 145303 sr_ns: LAMELLO145303
r: 03167600 p: 20.165 pid: 126159 b: LAMELLO q: 0 st: lt: 15 ean: 7640129666768 sr: LAMELLO 145304 sr_no_br: 145304 sr_no_br_cl: 145304 sr_cl: LAMELLO145304 sr_dash: sold: 40.33 p_range: none type: standard act: 1 avo: 1 av: n: LAMELLO Bisco P10 alignment slat for P-system grooves (80 pcs) - 145304 cn: BISCUIT cn2: BISCUIT cn_clear: BISCUIT d: Product description Plastic slats for Clamex P and Tenso P Align furniture parts flush against each other with Clamex P Check furniture for quality with Bisco P before gluing with Tenso P All corner and mitre joints from 22.5° to 180° Bisco P-10 from material thickness 12 mm, Bisco P-14 from 16 mm Bisco P is a plastic lamella. The alignment slat fits into the P-System groove 7 mm wide, but is not anchored together like Clamex P. Instead, it clips into the groove due to its surface structure. It can be used as a wooden slat with wood glue as a fixed joint. Bisco P is used in combination with Clamex P when only every second connector needs to exert tensioning force and between them an alignment element for joint alignment suffices as an invisible and cost-effective alternative. Another application is use as a dry joint before joining a workpiece with Tenso P and adhesive. The tensile strength of Tenso P is very high and can require a lot of force during disassembly depending on the angle of the workpieces. It is therefore advisable to check the precision of the machining operations with Bisco P. Afterwards, Bisco is simply removed from the grooves, replaced with Tenso P, adhesive is applied and the workpieces are assembled. Bisco P-14 is used in combination with Clamex P-14 or Tenso P-14, Bisco P-10 with size P-10 connectors. Applications Combination with Clamex P or Tenso P in furniture construction Applications analogous to the original Lamello wooden slat Size P10: butt joints from a material thickness of 12 mm, mitre joints from a material thickness of 18 mm Size P14: butt joints from a material thickness of 15 mm, mitre joints from a material thickness of 18 mm Features Flexible combining: In combination with Clamex or Tenso, ideal for ensuring that the furniture is properly aligned. Ideal for joints before gluing or joining Low milling depth: Minimum milling depth with maximum tensile strength Sliding tolerance in the profile groove: With the P-System, both workpieces can be aligned perfectly evenly Versatile: The small depth of the joiner allows mitres of 22.5 to 180°, such as for surface, corner and partition wall joints Flush alignment: The large sliding tolerance enables perfect flat alignment of workpieces ds: dsc: kts: alignment slat for P-system grooves (80 pcs) kpn: Bisco P10 kpn_dash: kpn_clear: BiscoP10 bkpn: LAMELLO Bisco P10 bkpn_clear: LAMELLO BiscoP10 c_path: Home / Fasteners and machine components / Fasteners / Wood joints / Biscuit | Home / Our brands / Lamello / Lamello fasteners and machine components / Lamello fasteners / Lamello wood joints / Lamello biscuit sr_no_br_cl_ns: 145304 sr_ns: LAMELLO145304
r: 03280865 p: 63.966 pid: 126085 b: LAMELLO q: 0 st: lt: 15 ean: 7640129666751 sr: LAMELLO 145305 sr_no_br: 145305 sr_no_br_cl: 145305 sr_cl: LAMELLO145305 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: LAMELLO Bisco P10 alignment slat for P-system grooves (300 pcs) - 145305 cn: BISCUIT cn2: BISCUIT cn_clear: BISCUIT d: Product description Plastic slats for Clamex P and Tenso P Align furniture parts flush against each other with Clamex P Check furniture for quality with Bisco P before gluing with Tenso P All corner and mitre joints from 22.5° to 180° Bisco P-10 from material thickness 12 mm, Bisco P-14 from 16 mm Bisco P is a plastic lamella. The alignment slat fits into the P-System groove 7 mm wide, but is not anchored together like Clamex P. Instead, it clips into the groove due to its surface structure. It can be used as a wooden slat with wood glue as a fixed joint. Bisco P is used in combination with Clamex P when only every second connector needs to exert tensioning force and between them an alignment element for joint alignment suffices as an invisible and cost-effective alternative. Another application is use as a dry joint before joining a workpiece with Tenso P and adhesive. The tensile strength of Tenso P is very high and can require a lot of force during disassembly depending on the angle of the workpieces. It is therefore advisable to check the precision of the machining operations with Bisco P. Afterwards, Bisco is simply removed from the grooves, replaced with Tenso P, adhesive is applied and the workpieces are assembled. Bisco P-14 is used in combination with Clamex P-14 or Tenso P-14, Bisco P-10 with size P-10 connectors. Applications Combination with Clamex P or Tenso P in furniture construction Applications analogous to the original Lamello wooden slat Size P10: butt joints from a material thickness of 12 mm, mitre joints from a material thickness of 18 mm Size P14: butt joints from a material thickness of 15 mm, mitre joints from a material thickness of 18 mm Features Flexible combining: In combination with Clamex or Tenso, ideal for ensuring that the furniture is properly aligned. Ideal for joints before gluing or joining Low milling depth: Minimum milling depth with maximum tensile strength Sliding tolerance in the profile groove: With the P-System, both workpieces can be aligned perfectly evenly Versatile: The small depth of the joiner allows mitres of 22.5 to 180°, such as for surface, corner and partition wall joints Flush alignment: The large sliding tolerance enables perfect flat alignment of workpieces ds: dsc: kts: alignment slat for P-system grooves (300 pcs) kpn: Bisco P10 kpn_dash: kpn_clear: BiscoP10 bkpn: LAMELLO Bisco P10 bkpn_clear: LAMELLO BiscoP10 c_path: Home / Fasteners and machine components / Fasteners / Wood joints / Biscuit | Home / Our brands / Lamello / Lamello fasteners and machine components / Lamello fasteners / Lamello wood joints / Lamello biscuit sr_no_br_cl_ns: 145305 sr_ns: LAMELLO145305
