Product description:
Excellent mechanical performance for long-term chemical protection
- Longer service life and good impact protection, thanks to the thickness of the material
Applications:
- Other sectors
- Maintenance in wet environments
- Mechanical industry
- Maintenance in wet environments (water, oil, grease, hydrocarbons)
- Construction (heating/plumbing)
- Remediation and cleaning of sceptic tanks
Instructions for use:
- It is recommended to check that the gloves are suitable for the intended use, as working conditions at the workplace may differ from the "ce" type tests.
- Persons sensitive to natural latex, dithiocarbamate or thiazole are not recommended to use these gloves.
- Use the gloves with dry, clean hands.
- Do not use the gloves with a chemical product for longer than the measured breakthrough time.
- Use 2 pairs of gloves alternately if in prolonged contact with solvents.
- Raise the cuff to prevent hazardous chemical from dripping onto the arm.
- Check gloves for cuts and holes before using.
Storage conditions:
- Store gloves in their original packaging, out of direct sunlight, away from heat sources and electrical equipment.
Washing conditions:
- Before removing gloves, clean them properly:
- When used with a solvent (ketone, etc.) : wipe with a dry cloth
- When used with acids or alkaline substances: rinse the gloves thoroughly under running water and rub with a dry cloth Caution: using the gloves or cleaning or washing them in a manner not specially recommended for them may alter their performance.
Drying conditions:
- Ensure that the inside of the gloves is dry before putting them back on.
Legislation:
- This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council.
- This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach).
