Product description:
Tactile sensitivity with wear indication
- Excellent flexibility and optimum thickness, thanks to mapa professionnel multiple-layer technology: good dexterity and comfort.
- Nitrile inner layer: excellent mechanical resistance and longer service life
- Green inner layer: abrasion
- Indication for increased safety
Applications:
- Other sectors
- Site contamination control
- Petrochemical refinery
- Mechanical industry
- Metal degreasing and etching
- Chemical industry
- Chemical treatments (solvents)
- Production of resins and adhesives
- Production of paints and varnishes
- Handling and transport of chemical products (solvents)
- Galvanoplasty
Instructions for use:
- It is recommended to check that the gloves are suitable for the intended use, as working conditions in the workplace may differ from the "ce" type tests.
- Persons sensitive to dithiocarbamate or thiazole are not recommended to use these gloves.
- Check the gloves for defects before using them.
- Use the gloves with dry, clean hands.
- Do not use the gloves with a chemical product for longer than the measured breakthrough time.
- Use 2 pairs of gloves alternately if in prolonged contact with solvents.
- Raise the cuff to prevent hazardous chemical from dripping onto the arm.
- Check gloves for cuts and holes before using.
Storage conditions:
- Store gloves in their original packaging, protected from humidity and heat.
Washing conditions:
- Before removing gloves, clean them properly:
- When used with paints; pigments or ink: wipe with a damp cloth with an appropriate solvent and then with a dry cloth.
- When using with a solvent (thinner, etc.), wipe with a dry cloth
- When used with acids or alkaline substances: rinse the gloves thoroughly under running water and rub with a dry cloth Note: improper use of the gloves or cleaning or washing them by a process not specially recommended for them may alter their performance.
Drying conditions:
- Ensure that the inside of the gloves is dry before putting them back on.
Legislation:
- This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council.
- This product contains more than 0.1% of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated according to regulation no 1907/2006 of the european parliament and of the council concerning the registration, evaluation, authorisation and restriction of chemicals (reach).