Scope of delivery
Product description
- Powerful torque of up to 345 Nm for tightening and 600 Nm for loosening, ideal for tough conditions with bolts up to M20
- 4 modes with Auto-stop/Auto slow function as an option for the best setting possibilities in different applications
- The Auto Stop function stops the tool after a preset time to prevent over-tightening of bolts.
- The Auto Slow function automatically lowers the RPM after a bolt is detected to prevent the bolt from falling out
- IP56 for excellent ingress protection under the harshest weather conditions and resistant to dust
- Integrated LED light for good visibility of the work surface
Key features according to our expert
-
Battery voltage: 18 V
-
Retention type (socket): Friction ring
-
Number of batteries included: 0
-
UN number: Not applicable
-
Weight: 1,3 kg
-
Type of system case: HSC II
-
Supplied in: System case
-
With extended drive shaft: No
-
Max. breakeway torque: 600 Nm
-
Max. tightening torque: 345 Nm
-
Tool holder type: External square
-
Tool holder size: 1/2"
-
Product Range: HiKOKI 18V
Specifications / All features
- Battery voltage
- 18 V
- Retention type (socket)
- Friction ring
- Number of batteries included
- 0
- Un number
- Not applicable
- Weight
- 1,3 kg
- Type of system case
- HSC II
- Supplied in
- System case
- With extended drive shaft
- No
- Max. breakeway torque
- 600 Nm
- Max. tightening torque
- 345 Nm
- Tool holder type
- External square
- Tool holder size
- 1/2"
- Idle speed low (min.)
- 0-1.200
- Max. tightening torque (nm)
- 345-600
- Speed at no load high (min.)
- 0-2.800
- Number of strokes loaded high (min.)
- 0-4.000
- Motor without carbon brushes
- 1
- Length (mm)
- 144
- Weight (kg)
- 1.3
- Battery voltage (v)
- 18
- Tool holder
- 1/2""
- Height (mm)
- 249
- Capacity hard bolt (mm)
- M10-M16
- Product range
- HiKOKI 18V
