TEROSON EP 5010 TR is a unique two-component epoxy cold-applied composition to replace tin solder for the repair of metal surfaces such as vehicle panels or bodies made of steel or aluminum.
Developed for the final finish of dented areas on hard to reach/rebuild parts or welded joints.
Does not shrink and is excellent to sharpen.
Must be applied with canister guns with a piston rod; the best results are achieved with the TEROSON ET GUN POWERLINE II.
Advantages
Two-component epoxy
Lead-free alternative to tin soldering, no open flame required
Resistant to sag, excellent finish of dented areas on hard-to-reach/repaired areas
No damage to existing cataphoretic paint, painted areas and sealed cavities and seams
Saves time; airbags, plastic, textile, fuel tank/inlet etc. do not need to be removed
Process can be accelerated by heating
No shrinkage
Excellent to sharpen
Easy to remove
hazard statement
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.