What our customers say 9.1 / 10

5255 Reviews

Klium awarded with

FAQ

Do you need help? Go to see our FAQ section.

SOUDAL SWS OUTSIDE STANDARD BLACK 100 MM X 30 M - SOUDAL 145965

SOUDAL 145965-SOUDAL SWS OUTSIDE STANDARD BLACK 100 MM X 30 M-klium
SOUDAL 145965-SOUDAL SWS OUTSIDE STANDARD BLACK 100 MM X 30 M-klium
22,27 per Roll (VAT excluded)
Available to ship in 7 days
Roll

  • Brand SOUDAL
  • Reference SOUDAL 145965
  • Ean 5411183161504

Applications

  • Air and driving rain tight membrane
  • SWS Outside Standard is an airtight, vapour-permeable and driving rain-tight window connection foil for use on the outside, with a strong self-adhesive strip for attachment to the window side.
  • Can always be glued in full on the outer cavity leaf using Soudafoil 360H.
  • Can be directly plastered over or finished with an exterior wall insulation system (ETICS).
  • Part of the SOUDAL WINDOW SYSTEM.

Properties

  • airtight
  • Driving rainproof
  • vapor open
  • Self-adhesive strip for attachment to the window profile (pressure sensitive)
  • flexible
  • UV resistant
  • Can be plastered over and glued on
  • Tear resistant
  • Good temperature resistance
  • Suitable for uneven surfaces
  • Easy installation, easy
  • pliable in the corners

Applications

  • SWS Buiten Standard window tap guarantees an air and driving rain tight and vapour-permeable connection of the window frame to the supporting construction around it.
  • This flexible membrane can also be used as an airtight and driving rain seal for all types of wall connections, even on uneven surfaces.
  • For outdoor use only.

Instructions

  • SWS Outside Standard may only be used on the outside. Depending on the situation, the installation of SWS Outside Standard can be carried out before or after the installation of the facade element (eg window frame). There are 2 methods to apply the SWS Outside Standard. You can work with a strip from 1 piece or you can work with 4 separate strips. In both cases, extra material must be provided for the corners (approx. 5 to 10 cm per corner). After unrolling and removing the protective film, stick the foil with the released adhesive strip (on the printed side) on the side OR on the front of the facade element. Both sides of the foil can be plastered over and glued. Soudafoil 360H must be used to glue the foil to the structural work. Adhere the foil, not too tightly, to the shell to absorb any movement between the different building elements, but avoid folds. Then press the foil evenly with a pressure roller. Please refer to the technical data sheet for more information.

Features for SOUDAL SWS OUTSIDE STANDARD BLACK 100 MM X 30 M

width 100 mm
material Butyl
roll length 30 m