What our customers say 9.1 / 10

5255 Reviews

Klium awarded with

FAQ

Do you need help? Go to see our FAQ section.

SOUDAL SWS OUTSIDE EXTRA BLACK 70 MM X 30 M - SOUDAL 145957

SOUDAL 145957-SOUDAL SWS OUTSIDE EXTRA BLACK 70 MM X 30 M-klium
SOUDAL 145957-SOUDAL SWS OUTSIDE EXTRA BLACK 70 MM X 30 M-klium
26,61 per Roll (VAT excluded)
Available to ship in 7 days
Roll

  • Brand SOUDAL
  • Reference SOUDAL 145957
  • Ean 5411183161580

Product description

  • Air and driving rain tight membrane
  • SWS Outside Extra is an airtight, vapour-permeable and driving rain-tight window connecting foil for use on the outside, with a strong self-adhesive strip for attachment to the window side and a strong full-surface self-adhesive adhesive layer for attachment to the structural work.
  • Can be directly plastered over or finished with an exterior wall insulation system (ETICS).
  • Part of the SOUDAL WINDOW SYSTEM.

Properties

  • airtight
  • Driving rainproof
  • vapor open
  • Full-surface self-adhesive for attachment to the structural work (pressure sensitive)
  • Self-adhesive strip for attachment to the window profile (pressure sensitive)
  • flexible
  • UV resistant
  • Can be plastered over and glued on
  • 2- or 3-part protective film (depending on the width)
  • Tear resistant
  • Good temperature resistance
  • Apply cold (no additional
  • glue needed)
  • No drying time, continue working immediately
  • Easy installation, easily pliable in the corners
  • Meets the requirements according to DIN4108 (EnEv) and the recommendations of the RAL mounting
  • Part of SWS (Soudal Window System)

Applications

  • SWS Outside Extra window tapes guarantee an air and driving rain tight and vapour-permeable connection of the window frame to the supporting construction around it.
  • This flexible membrane can also be used as an airtight and driving rain seal for all types of wall connections.
  • Only for outdoor use.

Instructions

  • SWS Outside Extra may only be used on the outside. Depending on the situation, the installation of SWS Outside Extra can be carried out before or after the installation of the facade element (eg window frame). There are 2 methods to apply the SWS Outside Extra. You can work with a strip from 1 piece or you can work with 4 separate strips. In both cases, extra material must be provided for the corners (approx. 5 to 10 cm per corner). After unrolling and removing the protective film, stick the foil to the side of the facade element with the released adhesive strip (on the printed side) or remove the protective foil from the adhesive strip on the non-printed side and stick the foil to the front of the facade element. Always make sure that the text is legibly oriented towards the visible side. Evenly remove the remaining protective film. Stick the foil, not too tightly, on the shell to absorb any movement between the different building elements, but avoid creases. The adhesive layer of the foil is pressure sensitive, the more firmly it is pressed, the better the adhesion. Use a pressure roller for this.

Features for SOUDAL SWS OUTSIDE EXTRA BLACK 70 MM X 30 M

width 70 mm
material Butyl
roll length 30 m