SMX-30 Plus Parquet Glue is an ultra strong, hard elastic parquet adhesive with a very fast strength build-up and high final strength, based on Soudal's SMX hybrid polymer technology, suitable for bonding all types of parquet.
It is also free from water, isocyanate and solvents.
Very suitable for gluing wide solid parquet on suitable substrates indoors.
With a very low emission rating (EC-1Plus)
Properties
Elastic
EC-1R PLUS label: very low emission
Ready-to-use 1-component system
Solvent-free
Anhydrous
Free from isocyanates
Easy to process
Good stability of the adhesive grooves
Very fast strength building
Very fast curing
High final strength (shear strength according to EN14293)
Suitable for underfloor heating
Avoids contamination of the hands.
Applications
SMX-30PLUS Parquet Glue is a universally applicable, water- and solvent-free SMX Polymer glue.
Extremely suitable for indoor bonding of many types of wooden floors, such as solid planks up to 18 cm wide, tropical and exotic woods, mosaic parquet, parquet parquet, wide multi-layer or ready-to-use parquet.
Suitable for use on absorbent and non-absorbent substrates such as anhydrite, sand-cement screeds, concrete coatings, leveling compounds, wood, chipboard and OSB board, as well as heated floors.
Instructions
Apply the adhesive to the substrate using the SOUDAL notched trowel N°11 for parquet. Do not apply more glue to the substrate than the part that can be covered with parquet within approximately 40 minutes. Place the parquet in the adhesive with a sliding movement and tap on it with a rubber mallet. Pay attention to good transfer of the adhesive to the parquet (min. 80% coverage). If necessary, weight the installed parquet. After at least 12 hours, the parquet can be sanded and treated.