High-quality lubricant based on PTFE (PolyTetraFluor-Ethylene).
Ideal for metal and plastic parts subject to high pressures and temperatures up to 250°C.
THE PTFE ensures a low coefficient of friction so that wear is prevented.
Properties
lubricates
Reduces friction and wear
Rust and corrosion resistant
Water repellent
Silicone-free
For indoor and outdoor
Aerosol can be used at an angle of 360°
Applications
Good to use on parts that are under long and high force and temperature loads (-50°C to 250°C).
High penetration power.
Displaces water and dirt.
PTFE provides long-lasting protection against friction and prevents wear.
Very good mechanical and thermal stability.
Can be used for machines, roller bearings, shafts, gears, conveyor belts, rubber sealing profiles,...
Instructions
Thoroughly clean, degrease and dry the surface. Shake aerosol well before use. Inject from approx. 20 cm distance. For best results, move moving parts if possible during application.