LVT Premium Adhesive Floor and Wall is a universal, ready-to-use solvent-free dispersion adhesive for elastic floor coverings on flat, absorbent substrates.
Properties
Ready-to-use pasta
Easy to spatula, even under difficult conditions
High (initial) tack
Very high final strength
Immediately walkable
Heat resistant, also for underfloor heating
For indoor use
EC-1 PLUS label: very low-emission
Complies with EN14259: Adhesives for floor coverings
Applications
Specifically for the bonding of elastic floor coverings such as LVT strips, homogeneous and heterogeneous PVC tiles and cushion vinyl for floors and walls.
Also suitable for rubber floor coverings, needle felt and carpet tiles, PVC sheets, woven carpet and linoleum on porous flat surfaces such as cement screed (screed), leveling compound, wood and concrete.
Instructions
Draw starting axes and determine laying pattern. Stir the glue well before use. Apply LVT Premium Adhesive Floor and Wall with the appropriate adhesive spatula on the appropriate substrate (see technical data). Do not apply more adhesive than can be installed in 10-20 minutes. After a waiting period of 10 to 15 minutes, place the non-vapor-permeable floor covering (vinyl, PVC, carpet with foam backing) and linoleum in the still wet adhesive, tension-free and ensure that there are no air inclusions. Immediately rub, press or roll the floor covering over the entire surface to obtain a good adhesive transfer. For more information, please refer to the technical data sheet.
Features for SOUDAL PREMIUM LVT FLOOR & WALL 13 KG