MS-30PLUS Parquet Glue is a universally applicable, water- and solvent-free polymer adhesive.
Ideally suited for indoor bonding of subfloors (mosaic, chipboard buns) and many types of wooden floors such as solid planks, solid tapis parquet, mosaic parquet, lamella parquet, multi-layer or ready-made parquet and laminate parquet.
Properties
Highly elastic
EC-1R PLUS label: very low emission
Ready to use 1 component system
Solvent-free
Anhydrous
Free from isocyanates
Easy to process
Good stability of the adhesive grooves
Rapid strength building
Fast curing
High final strength (shear strength according to EN14293)
Suitable for underfloor heating
Avoids contamination of the hands
Applications
Suitable for use on absorbent and non-absorbent substrates such as anhydrite, sand-cement screeds, concrete coatings, leveling compounds, wood, chipboard and OSB board, as well as heated floors.
MS-30PLUS Parquet Glue is also extremely suitable for installing moisture-sensitive wood on weakly absorbent substrates.
Instructions
Apply the adhesive to the substrate using the SOUDAL notched trowel N°11 for parquet.
If the parquet is smaller than 60mm wide by 300mm long, the fine-toothed SOUDAL trowel N°3 is recommended.
Do not apply more glue to the substrate than the part that can be covered with parquet within approx. 30 minutes.
Place the parquet in the adhesive with a sliding movement and tap on it with a rubber mallet.