MS-20 Plus is a universally applicable elastic parquet adhesive, free of water and solvents.
Very suitable for gluing multi-layer parquet and narrow solid parquet.
Properties
Elastic
EC-1R PLUS label: very low emission
Ready to use 1 component system
Solvent-free
Anhydrous
Free from isocyanates
Easy to process
Good stability of the adhesive grooves
Rapid strength building
Fast curing
High final strength (shear strength according to EN14293)
Suitable for underfloor heating
Avoids contamination of the hands
Applications
Suitable for use on absorbent and non-absorbent substrates such as anhydrite, sand-cement screeds, concrete coatings, leveling compounds, wood, chipboard and OSB board, as well as heated floors.
Instructions
Apply the adhesive to the substrate using the SOUDAL notched trowel N°11 for parquet. Do not apply more glue to the substrate than the part that can be covered with parquet within approx. 30 minutes. Place the parquet in the adhesive with a sliding movement and tap on it with a rubber mallet. Pay attention to good transfer of the adhesive to the parquet (min. 80% coverage). If necessary, weight the installed parquet. After a minimum of 24 hours, the parquet can be sanded and treated.