What our customers say 9.1 / 10

5255 Reviews

Klium awarded with


Do you need help? Go to see our FAQ section.

SOUDAL EPDM MEMBRANE 1.2 X 250 MM / 20 M - SOUDAL 130288

SOUDAL 130288-SOUDAL EPDM MEMBRANE 1.2 X 250 MM / 20 M-klium
SOUDAL 130288-SOUDAL EPDM MEMBRANE 1.2 X 250 MM / 20 M-klium
79,40 per Piece (VAT excluded)
Available to ship in 7 days

You need to purchase this product by 4.

  • Brand SOUDAL
  • Reference SOUDAL 130288
  • Ean 5411183134164

Product description

  • Air and waterproof membrane
  • EPDM membrane for a weather-resistant seal in external facade applications.
  • Soudal EPDM Membrane facade strips provide a durable watertight and airtight seal around facade elements and on windowsills and sills.
  • Also suitable for sealing at foundation roots.
  • According to CE: EN 13984. Thickness 1.2 mm.
  • Different roll widths available.


  • Air and watertight
  • Compatible with bitumen
  • Good temperature resistance
  • Excellent resistance to UV radiation and all weather influences
  • Alkali resistant
  • Resistant to micro-organisms
  • Permanently elastic
  • flexible
  • High tear resistance
  • Complies with EN13984


  • For airtight and watertight sealing of connections, wall feet (protection against rising moisture) and window and door connections: outer side inner leaf (for applying the facade insulation), outer side of solid walls, outside of ventilated facades and under window sills or sills.


  • Depending on the situation, the installation of EPDM Membrane can be carried out before or after the installation of the facade element (eg window frame). Cut EPDM Membrane 10 cm to 20 cm longer than the length of the relevant facade element (eg window frame). This gives 5 cm to 10 cm on both sides to overlap the corners. The foil can be attached to the facade element with Soudaseal EPDM or by means of a mechanical attachment (a pressure strip, clamping strip, etc.). Start at the bottom of the building element and work your way up for good drainage. After installing the facade element, fill the connection with the structural work with a suitable PU foam (eg Flexifoam). After the foam has hardened (and possibly cut it off), EPDM Membrane is glued on the structural side with Soudaseal EPDM. To do this, apply a 5 to 6 mm thick and uninterrupted (= airtight!) adhesive bead. Calculate +/- 1 bead of glue per 5 cm EPDM width. Stick the foil, not too tightly, on the shell to absorb any movement between the different building elements, but avoid folds. Then press the foil evenly with a pressure roller so that a 1 to 2 mm thick adhesive layer is created, approximately 25 mm wide. In this way there is sufficient bonding surface and the glue can harden well. The overlapping parts of the EPDM Membrane (eg in the corners) must be glued using Soudaseal EPDM. The bonding can only be loaded after complete curing of the adhesive. Consult the technical data sheet of the adhesive for this.

Features for SOUDAL EPDM MEMBRANE 1.2 X 250 MM / 20 M

width 250 m
thickness 1.2 mm
material EPDM
roll length 20 m