The RIDGID electric pipe cutter model 258 cuts steel pipe, galvanized pipe, rigid pipe etc. from 2 1? 2 "(65 mm) to 8" (200 mm) with wall thicknesses from 0.15 "(3.8 mm) to 0, 4 "(10 mm) at work location or in the workplace. The 258 powered by the RIDGID 700 with electric drive is a pipe cutter according to the displacement principle that produces right angle cuts. The user controls the cutting speed by pumping on the hydraulic foot pump during operation. A square cut with a minimum burr formation at 21 ft (6 m) or nipple length of the pipe is achieved quickly ** without any dust, sparks or open flames. In addition, the RIDGID chamfer pipe support can be used to rotate the pipe while a second person uses a grinder to chamfer the pipe.
Angle cutting of 21 ft (6 m) or nipple lengths of the pipe without effort.
Cuts effortlessly because pipe material is displaced instead of removed. No grinding dust, dangerous sparks, or open flame.
Cuts steel pipe quickly with minimal burrs.
Ideal for cutting pipe for connection with groove seams.
Robust construction is perfect for use on site or in the workplace.