Glue | Rectavit | Sealing and adhesives

Brand

Water resistance

Moisture resistance

Viscosity 1

Solids content

Curing 1

Temperature resistance

: From -15 ° c to + 70 ° c (19)
: From -20 to + 70 ° c (19)
: From -30 ° c to + 100 ° c (7)
: From -20 ° c to + 80 ° c (6)
: From -35 ° c to + 90 ° c (6)
: From -35 ° c to + 90 ° c, max. + 120 ° c for 1h (6)
: -30 ° c to min. + 100 ° c (3)
: From -10 ° c to + 60 ° c (3)
: Up to + 80 ° c (2)
: From 0 ° c to + 50 ° c (2)
: From -20 ° c to + 70 ° c (2)
: From -20 to + 80 ° c (2)
: From -30 ° c to + 100 ° cwatt'91 certification (2)
: From -35 ° c to + 90 ° clakstraat: max. 30 min at + 200 ° c max. 45 min at + 180 ° c (2)
: From -40 ° c to + 100 ° c (2)
: From -40 ° c to + 90 ° c (2)
: Good, to min. + 70 ° c (1)
: From -10 ° c to + 120 ° c (1)
: From -15 ° c to + 105 ° c (1)
: From -15 ° c to + 80 ° c, briefly to + 110 ° c (1)

Paintable

Open time

: About 15 min (11)
: Approx. 5 min (10)
: About 10 min (9)
: Approx. 8 min (6)
: Approx. 30 min (4)
: About 6 min. (3)
: Max. 30 min (3)
: Approx. 10 s (2)
: Approx. 20 min (2)
: Approx. 5 min (at + 20 ° c) (2)
: 60-70 min after application (1)
: Approx. 15 minutes after application (1)
: Approx. 20 min after application (1)
: Approx. 8 minutes after application (1)
: Max. 10-15 min (1)
: Min. 30 min (1)
: Environment temp. open time curing time. + 5 ° c 20min 120min + 10 ° c 12min 80min + 20 ° c 5min 45min + 30 ° c 3min 25minmax. + 35 ° c 2min 20min (1)
: Permanent, approx. 10 minutes, approx. 20 min (1)

Color 1

Repairs

Printing and pressing

: 15-30 s, press firmly, roll or knock (16)
: Min. 1à 2 kg / cm² (0.1 n / mm²) for at least 30 min (6)
: Min. 1 kg / cm² (0.1 n / mm²) for 5 to 15 minutes, for flat bonding. 3 kg / cm² (0.3 n / mm²) for 5 to 15 minutes, for construction work (6)
: Min. 1 kg / cm² (0.1 n / mm²) for at least 2 h, for flat bonding min. 3 kg / cm² (0.3 n / mm²) for at least 2 h, for construction work (6)
: Min. 0.5 kg / cm² for at least 6 h (4)
: None, only squeeze and fix for 60min. (3)
: Min. 0.5 kg / cm² for min. 15 min (3)
: 1 to 6 kg / cm² 60 min + 20 ° c (2)
: 15-30 s, press down well, roll or press (1)
: Min. 0.5 kg / cm² for min. 30 min (1)
: Min. 0.5 kg / cm² for min. 90 min (1)

Density 1

Base

Shear strength

: D2 (according to en204) (12)
: D3 (according to en204) (7)
: D1t, (according to EN12004) (6)
: 0.12 n / mm² (according to DIN53427) (5)
: Greater than 9.5 n / mm² (5)
: Greater than 10 n / mm² (beech / beech), according to en204 (3)
: D2te, (according to EN12004) (2)
: D4 (according to en204) (2)
: Greater than 10 n / mm² (2)
: Greater than 11 n / mm² (2)
: Greater than 2.00 n / mm² for brass with a glue thickness of 2 mm & a drawing speed of 10 mm / min. (2)
: Greater than 1.5 n / mm² (according to and 14293, wood / wood) (1)
: Greater than 6 n / mm² (according to and 14293, wood / wood) (1)