Protection against abrasive wear due to fine particles
Carbide-filled epoxy to protect processing equipment from abrasive wear caused by fine particles. This spatible epoxy does not collapse and is suitable for repairs above the head and vertical surfaces.
Characteristics :
colour | gray |
Recommended layer thickness | min: 6mm |
Particle size | nice |
Compressive strength | 103.4 N / mm² |
Hardness Shore D | 85 |
Product base | ceramic filled epoxy |
Shade strength (GBMS) | 34.5 N / mm² |
Temperature range | -29 ° C to +120 ° C |
Curing time | 6 hours |
Processing time | 30 min |