Controlled tightening of screw connections in the range of 110 - 550 N m / 80 - 405 lbf ft
Adjustable, audibly and tactilely tripping, robust torque wrench with round pin receptacle
Classified according to DIN EN ISO 6789-2:2017 Type II class A, calibrated with a maximum permissible deviation of +/- 3% and thus more accurate than the /- 4% prescribed by the standard.
Including traceable test certificate (DIN EN ISO 6789-2:2017)
For controlled clockwise and counterclockwise tightening (change insertion tool to change direction)
Pin holder Ø 16 mm and Ø 22 mm
Factory calibration pitch: 32 mm (Ø 16 mm) or 56 mm (Ø 22 mm)
Robust, matt powder-coated steel pipe construction, with galvanized ratchet and high-quality plastic parts
New ergonomic handle, shaped according to the natural gripping position of the hand
Clearly recognizable, tactile, centering and calibration aid in the center of the handle
Double scale Nm / lbf-ft with vernier (Nm), enlarged viewing window protects against dirt and damage.
With vernier scale for Nm main scale for setting intermediate scale values; lbf-ft setting via master scale only
Vertical arrangement of the scale, so suitable for left and right-handed users.
Setting mark directly above the scale, prevents reading errors (parallax error)
Unit marking integrated into the scale and also protected from dirt by viewing window
Precise shut-off mechanism generates a clear tactile and audible signal when the set tightening value is reached.
incl. roll-away protection, prevents rolling away when putting down the key
Features for GEDORE TF-Z550 TORQUE WRENCH TORCOFIX Z 22 110-550 NM