FLUKE FEV300/TY1 & TY2 TEST ADAPTER KIT FOR ELECTRIC VEHICLE CHARGING STATION: TYPE 1 AND 2 CONNECTORS - FLUKE 5347993

Scope of supply

• FEV300/BASIC test adapter
• FEV300-CON-TY1 Type 1 plug
• FEV300-CON-TY2 Type 2 plug
• Carrier bag

Product description

• Simulate current capacities of charging cables
• Simulate charging status of different vehicles
• Simulate ground fault
• Includes vehicle connectors with type 1 and type 2 plug
• Test in accordance with IEC/EN 61851-1 and IEC/HD 60364-7-722

The FEV300 test adapter kit with type 1 and type 2 connectors is designed to test the operation and safety of charging stations, mode 3, for charging AC traction batteries. The adapter imitates an electric vehicle and starts a charging cycle, activating the voltage/current output, allowing you to perform tests in combination with suitable measuring instruments such as an installation tester (Fluke 1664 FC) and/or an oscilloscope (Fluke 120B series). The adapter set allows charging stations to be tested in accordance with IEC/EN 61851-1 and IEC/HD 60364-7-722.

• PP status (Proximity Pilot) 'cable simulation': The rotary switch for the PP status allows the adapter to simulate different power options of the charging cables
• CP status (Control Pilot) 'vehicle simulation': Different charging statuses can be simulated using the CP status rotary switch
• Simulation of CP fault “E” and simulation of PE fault (“earth fault”)

Two different connectors

Use the FEV300-CON-TY1 Type 1 plug to connect to an EV charging station with a Type 1 vehicle connector. Use the FEV300-CON-TY2 Type 2 plug to connect to a Type 2 EV Charging Station with a wall socket or to connect to a Type 2 EV Charging Station with a vehicle connector.

Simplicity and convenience

Perform various tests including ground fault checks, wire insulation, voltage measurement and duty cycle to see the max current available for charging an all-in-one adapter that can be safely integrated into the Fluke portfolio of test and measuring instruments. The FEV300 allows you to simulate a CP fault (E) and PE fault (earth fault) and provides separate phase indication with three LED lights to easily check if voltage is present. There is no need to bring an electric vehicle on site for troubleshooting at the charging station: the adapter acts as an electric vehicle when connected to a charging station for simple performance and maintenance testing.

Suitable for

• Fluke 1662 multifunction installation tester
• Fluke 1663 multifunction installation tester
• Fluke 1664 FC Multifunction Installation Tester
• Fluke 87V digital multimeter
• Handheld oscilloscopes of the industrial ScopeMeter series Fluke 120B
• Fluke 1587 FC Insulation Multimeter
• Fluke 1732 and 1734 three-phase electrical energy loggers
• Fluke 1735 Three Phase Power Logger
• Fluke 1736 and 1738 Three Phase Power Quality Loggers