Pressure module, 0 psi to 30 psi (0 to 2 bar), (0 to 200 kPa)
Adapter from 1/8 NPT male to 1/4 NPT male
Adapter from 1/8 NPT male to 1/4 BSP male
Adapter from 1/8 NPT male to M20 male
Calibration certificate
Instruction manual
Most important features
The 750P series pressure modules are ideal pressure modules to measure overpressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and with the 725 and 726 multifunctional process calibrators.
0.025% reference uncertainty
Specifications for 6 months and 1 year
Temperature compensation from 0 ° C to 50 ° C
Digital communication with calibrators, no analogue losses or errors
Wide choice of ranges
Measurement models for excess pressure, differential pressure, double range, absolute pressure and vacuum
Product description
A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You will find the range of this specific printing module above at "Delivery scope".
Overpressure modules have one pressure connection and measure the pressure in relation to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting and the low fitting. Each module is clearly marked in terms of range, overpressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunctional and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702).
Measuring quickly and easily
The pressure modules of the Fluke 750P series are easy to use. To measure pressure, connect the pressure module to a pressure source or hand pump and then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press on the head you can display the pressure in 11 different technical units. When using the 750 series documenting process calibrators, pressure measurements can be given a date-time indication and stored electronically for later use. This saves time, ensures fewer errors and supports compliance with quality standards and regulations.