What our customers say 9.1 / 10

5462 Reviews

Klium awarded with

FISCHER FH II 10/10 H SAFETY ANCHOR FH II - FISCHER 503139

FISCHER 503139-FISCHER FH II 10/10 H SAFETY ANCHOR FH II-klium
FISCHER 503139-FISCHER FH II 10/10 H SAFETY ANCHOR FH II-klium
2,14 per Piece (VAT excluded)
On order - Estimated availability to ship: 7 days
Piece

You need to purchase this product by 50.

  • Brand FISCHER
  • Reference FISCHER 503139
  • Ean 4048962016796

Product description
  • The fischer safety anchor FH II H with cap nut is a sleeve anchor made of galvanized steel
  • The anchor is placed in the time-saving push-through installation
  • When the anchor is tightened, the cone is pulled into the expansion sleeve and spans it against the wall of the borehole.
  • The black plastic ring prevents the anchor from rotating and absorbs the tightening lip
  • The mounting piece is therefore pulled against the anchorage ground
  • The fischer safety anchor FH II H with cap nut is particularly suitable for mounting steel structures, machines and gates in cracked and uncracked concrete.
Extra Features
  • ETA approval for cracked concrete.
  • Power-saving installation thanks to optimized plug geometry.
  • With cap nut.
  • Less fastening points due to large transverse load bearing capacity.
  • Time-saving push-through installation.
  • The push-through anchor with cap nut for fastenings with an appealing design in cracked concrete.
Applications
  • Handrails
  • Kick
  • Consoles
  • Steel constructions
  • Ladders
  • Cable channels
  • Machines
  • Fencing
  • Façade systems
  • Railing
Construction materials
  • Approved for:
  • Concrete C20 / 25 to C50 / 60, cracked and uncracked
  • Also suitable for:
  • Concrete C12 / 15
  • Natural stone with high density
Suitable for
  • The FH II is suitable for push-through installation.
  • When the torque is applied, the cone is pulled into the expansion clamp, which forces it against the borehole wall.
  • The black plastic ring prevents rotation during securing of the anchor and acts as a zone that accommodates the coupling lip so that the attachment is pulled onto the anchor base.
  • Available head shapes for flexible design solutions: Countersunk head (type SK
  • for flat surface and fixing points that can then be secured against theft), hex bolt (type S), bolt design with nut and washer (type B) and cap nut (type H).
Benefits
  • The anchor construction allows a variety of head shapes for fixing points with an advanced design.
  • The ideal interaction of screw fork and sleeve enables a high shear load
  • This means fewer attachment points are required.
  • The international approvals guarantee optimum safety and performance.
  • Thanks to the optimized geometry, the installation can be performed with less energy.
  • The detachable screw fastening enables flat removal of the surface.

Features for FISCHER FH II 10/10 H SAFETY ANCHOR FH II

borehole diameter (mm) 10
wire (mm) M 6
max. thickness of attachment (mm) 10
min. borehole depth for push-through installation (mm) 65
plug length (mm) 75
key width (mm) 13

Extra information