r: 02394477 p: 202.438 pid: 104688 b: LAMELLO q: 30 st: 1 lt: 1 ean: 7640149932003 sr: LAMELLO 145425 sr_no_br: 145425 sr_no_br_cl: 145425 sr_cl: LAMELLO145425 sr_dash: sold: 149601.682 p_range: none type: standard act: 1 avo: 1 av: Width 66 mm Thickness 9,7 mm Quantity per box 300 Length 27 mm n: LAMELLO TENSO P-14 cabinet connectors (300 pcs) - 145425 cn: BISCUIT JOIN cn2: BISCUIT JOIN cn_clear: BISCUITJOIN d: Product description Self-locking connector for gluing, installed in seconds Invisible joint for maximum aesthetics Clamping function, ideal for mitres and joints from 22.5° to 180° High clamping force for perfectly clamped joints without screw clamps and clamping aids Glueing tool for a wide range of applications in furniture or interior design Tenso P-14 is a self-tensioning connector for gluing wood materials and is anchored in the interlocking P-System grooves in the workpiece within seconds. Tenso P-14 consists of a joining half with powerful tension springs. These anchor themselves in the counterpiece and exert high pressure on the joint. Thanks to this high tension force, the user can bond furniture parts or wood materials without clamps, bobbins, tape or presses. The Tenso presses the joints together at the correct angle, always perpendicular to the cutting angle of the two workpieces. With the Tenso P-14, the user can bond workpieces tremendously fast and save time during the entire production process: efficient milling of the P-System grooves, inserting the connectors by hand and without glue or screws, applying glue and assembling workpieces afterwards. There is no need to wait and an assembled workpiece can immediately be further processed or prepared for shipment. Tenso P-14 is completely concealed, allowing workpieces to be manufactured with perfect aesthetics without a visible joint. Like the tried-and-tested Lamello system, the connector can be used at virtually any joint angle. This means that obtuse, pointed or flat corners can be joined. The connector is therefore often used as a gluing aid for workpieces that are difficult to clamp. The pre-tensioning clamp can possibly be used when mitre joints have to be glued or when, for larger parts, several connectors have to be mounted in succession at the same time. The prestressing clamp increases lateral clearance when assembling and reduces the force required to join the Tenso P-14. Blunt joints from a material thickness of 15 mm. Mitre joints from a material thickness of 18 mm. Applications Self-tensioning furniture connector for gluing in kitchen, furniture or interior design Glueing aid for difficult to clamp joints, e.g. counters or wall panels in interior design. Gluing of pillar panelling Furniture with mitre joints on five sides More complex furniture can be glued and assembled piece by piece instead of applying glue to all workpieces and clamping the furniture with clamps under time pressure Dry joints before gluing with Bisco P-14 Blunt joints from a material thickness of 15 mm Mitre joints from a material thickness of 18 mm Properties High clamping force: Can be perfectly aligned and draws workpieces together Bonding: Time-saving joining without using clamps and waiting for the glue to dry Invisible: Fully hidden connection panels for the highest demands Stackable: Workpieces with pre-assembled fittings remain stackable for easy storage or transportation Versatile: The small depth of the connector allows mitre cuts of 22.5 to 180°, such as for surface, corner and partition joints ds: dsc: kts: cabinet connectors (300 pcs) kpn: TENSO P-14 kpn_dash: TENSO P kpn_clear: TENSOP14 bkpn: LAMELLO TENSO P-14 bkpn_clear: LAMELLO TENSOP14 c_path: Home / Fasteners and machine components / Fasteners / Wood joints / Biscuit joint | Home / Our brands / Lamello / Lamello fasteners and machine components / Lamello fasteners / Lamello wood joints / Lamello biscuit joint sr_no_br_cl_ns: 145425 sr_ns: LAMELLO145425
r: 02608349 p: 343.636 pid: 103779 b: LAMELLO q: 12 st: 1 lt: 1 ean: 7640149930252 sr: LAMELLO 145346 sr_no_br: 145346 sr_no_br_cl: 145346 sr_cl: LAMELLO145346 sr_dash: sold: 141578.032 p_range: none type: standard act: 1 avo: 1 av: Width 66 mm Thickness 9,7 mm Quantity per box 300 Length 27 mm n: LAMELLO CLAMEX P-14 cabinet connectors (300 pcs) - 145346 cn: BISCUIT JOIN cn2: BISCUIT JOIN cn_clear: BISCUITJOIN d: Product description Removable furniture connector, installed in seconds Aesthetic appearance with the barely visible 6 mm drill hole All-rounder for all corner and mitre joints from 22.5° to 180° High clamping force for perfectly closed joints Ideal for open shelves, cupboards or wardrobes under sloping ceilings Clamex P-14 is a demountable furniture connector and is anchored into the workpiece within seconds with the interlocking P-System grooves. With its minimalist operating opening of 6 mm, Clamex P-14 is powerfully joined and released via a lever, similar to an eccentric joiner. Clamex P-14 is highly aesthetic thanks to its small operating aperture of only 6 mm diameter and allows almost completely hidden connections. Clamex P-14 is designed for butt joints and as a mitre connector. It is also distinguished by a very time-saving production process. The P-System grooves are precisely manufactured either with the groove milling machine Zeta P2 or with a CNC machine. The connectors are then effortlessly pushed into the grooves, the workpieces seamlessly joined and powerfully connected by lightly pressing the lever. So there is no need to wait and an assembled workpiece can immediately be further processed or prepared for shipment. With Clamex P-14, wood joints can be joined at almost any angle and mitre, as with the tried-and-tested Lamello system. Unlike an eccentric, obtuse, pointed or flat corners can also be assembled and powerfully joined. Therefore, the joiner is also often used as a gluing aid for difficult to clamp workpieces. Applications Removable connecting fittings for sheet materials in furniture construction Gluing aid for mitred joints or corners that are difficult to stretch In kitchen construction in tall units, frame constructions or open shelves In interior construction for built-in cupboards, wardrobes under stairs or sloping roofs In furniture construction for high-quality furniture with mitred joints or unusual angles, wine racks or bookcases Powerful alternative to connection fittings standards Rapid construction of prototypes for the start of a new furniture series Blunt joints from a material thickness of 15 mm Mitre joints from a material thickness of 18 mm Features Dismountable: Always detachable with the rotating lever Aesthetic: the small, barely visible opening (Ø = 6 mm) serves to open and close the connector Quick assembly: Sliding in instead of screwing or gluing, in the blink of an eye and without waiting times Stackable: Workpieces with pre-assembled fittings remain stackable for easy storage or transportation Versatile: the small depth of the connector allows mitres of 22.5 to 180°, such as for surface, corner and intermediate wall joints ds: dsc: kts: cabinet connectors (300 pcs) kpn: CLAMEX P-14 kpn_dash: CLAMEX P kpn_clear: CLAMEXP14 bkpn: LAMELLO CLAMEX P-14 bkpn_clear: LAMELLO CLAMEXP14 c_path: Home / Fasteners and machine components / Fasteners / Wood joints / Biscuit joint | Home / Our brands / Lamello / Lamello fasteners and machine components / Lamello fasteners / Lamello wood joints / Lamello biscuit joint sr_no_br_cl_ns: 145346 sr_ns: LAMELLO145346
r: 02624036 p: 98.181 pid: 105164 b: LAMELLO q: 21 st: 1 lt: 1 ean: 7640149930245 sr: LAMELLO 145334 sr_no_br: 145334 sr_no_br_cl: 145334 sr_cl: LAMELLO145334 sr_dash: sold: 70101.234 p_range: none type: standard act: 1 avo: 1 av: Width 66 mm Thickness 9,7 mm Quantity per box 80 Length 27 mm n: LAMELLO CLAMEX P-14 cabinet connectors (80 pcs) - 145334 cn: BISCUIT JOIN cn2: BISCUIT JOIN cn_clear: BISCUITJOIN d: Product description Removable furniture connector, installed in seconds Aesthetic appearance with the barely visible 6 mm drill hole All-rounder for all corner and mitre joints from 22.5° to 180° High clamping force for perfectly closed joints Ideal for open shelves, cupboards or wardrobes under sloping ceilings Clamex P-14 is a demountable furniture connector and is anchored into the workpiece within seconds with the interlocking P-System grooves. With its minimalist operating opening of 6 mm, Clamex P-14 is powerfully joined and released via a lever, similar to an eccentric joiner. Clamex P-14 is highly aesthetic thanks to its small operating aperture of only 6 mm diameter and allows almost completely hidden connections. Clamex P-14 is designed for butt joints and as a mitre connector. It is also distinguished by a very time-saving production process. The P-System grooves are precisely manufactured either with the groove milling machine Zeta P2 or with a CNC machine. The connectors are then effortlessly pushed into the grooves, the workpieces seamlessly joined and powerfully connected by lightly pressing the lever. So there is no need to wait and an assembled workpiece can immediately be further processed or prepared for shipment. With Clamex P-14, wood joints can be joined at almost any angle and mitre, as with the tried-and-tested Lamello system. Unlike an eccentric, obtuse, pointed or flat corners can also be assembled and powerfully joined. Therefore, the joiner is also often used as a gluing aid for difficult to clamp workpieces. Applications Removable connecting fittings for sheet materials in furniture construction Gluing aid for mitred joints or corners that are difficult to stretch In kitchen construction in tall units, frame constructions or open shelves In interior construction for built-in cupboards, wardrobes under stairs or sloping roofs In furniture construction for high-quality furniture with mitred joints or unusual angles, wine racks or bookcases Powerful alternative to connection fittings standards Rapid construction of prototypes for the start of a new furniture series Blunt joints from a material thickness of 15 mm Mitre joints from a material thickness of 18 mm Features Dismountable: Always detachable with the rotating lever Aesthetic: the small, barely visible opening (Ø = 6 mm) serves to open and close the connector Quick assembly: Sliding in instead of screwing or gluing, in the blink of an eye and without waiting times Stackable: Workpieces with pre-assembled fittings remain stackable for easy storage or transportation Versatile: the small depth of the connector allows mitres of 22.5 to 180°, such as for surface, corner and intermediate wall joints ds: dsc: kts: cabinet connectors (80 pcs) kpn: CLAMEX P-14 kpn_dash: CLAMEX P kpn_clear: CLAMEXP14 bkpn: LAMELLO CLAMEX P-14 bkpn_clear: LAMELLO CLAMEXP14 c_path: Home / Fasteners and machine components / Fasteners / Wood joints / Biscuit joint | Home / Our brands / Lamello / Lamello fasteners and machine components / Lamello fasteners / Lamello wood joints / Lamello biscuit joint sr_no_br_cl_ns: 145334 sr_ns: LAMELLO145334
r: 02374167 p: 58.636 pid: 104682 b: LAMELLO q: 15 st: 1 lt: 1 ean: 7640149931990 sr: LAMELLO 145415 sr_no_br: 145415 sr_no_br_cl: 145415 sr_cl: LAMELLO145415 sr_dash: sold: 31487.532 p_range: none type: standard act: 1 avo: 1 av: Width 66 mm Thickness 9,7 mm Quantity per box 80 Length 27 mm n: LAMELLO TENSO P-14 cabinet connectors (80 pcs) - 145415 cn: BISCUIT JOIN cn2: BISCUIT JOIN cn_clear: BISCUITJOIN d: Product description Self-locking connector for gluing, installed in seconds Invisible joint for maximum aesthetics Clamping function, ideal for mitres and joints from 22.5° to 180° High clamping force for perfectly clamped joints without screw clamps and clamping aids Glueing tool for a wide range of applications in furniture or interior design Tenso P-14 is a self-tensioning connector for gluing wood materials and is anchored in the interlocking P-System grooves in the workpiece within seconds. Tenso P-14 consists of a joining half with powerful tension springs. These anchor themselves in the counterpiece and exert high pressure on the joint. Thanks to this high tension force, the user can bond furniture parts or wood materials without clamps, bobbins, tape or presses. The Tenso presses the joints together at the correct angle, always perpendicular to the cutting angle of the two workpieces. With the Tenso P-14, the user can bond workpieces tremendously fast and save time during the entire production process: efficient milling of the P-System grooves, inserting the connectors by hand and without glue or screws, applying glue and assembling workpieces afterwards. There is no need to wait and an assembled workpiece can immediately be further processed or prepared for shipment. Tenso P-14 is completely concealed, allowing workpieces to be manufactured with perfect aesthetics without a visible joint. Like the tried-and-tested Lamello system, the connector can be used at virtually any joint angle. This means that obtuse, pointed or flat corners can be joined. The connector is therefore often used as a gluing aid for workpieces that are difficult to clamp. The pre-tensioning clamp can possibly be used when mitre joints have to be glued or when, for larger parts, several connectors have to be mounted in succession at the same time. The prestressing clamp increases lateral clearance when assembling and reduces the force required to join the Tenso P-14. Blunt joints from a material thickness of 15 mm. Mitre joints from a material thickness of 18 mm. Applications Self-tensioning furniture connector for gluing in kitchen, furniture or interior design Glueing aid for difficult to clamp joints, e.g. counters or wall panels in interior design. Gluing of pillar panelling Furniture with mitre joints on five sides More complex furniture can be glued and assembled piece by piece instead of applying glue to all workpieces and clamping the furniture with clamps under time pressure Dry joints before gluing with Bisco P-14 Blunt joints from a material thickness of 15 mm Mitre joints from a material thickness of 18 mm Properties High clamping force: Can be perfectly aligned and draws workpieces together Bonding: Time-saving joining without using clamps and waiting for the glue to dry Invisible: Fully hidden connection panels for the highest demands Stackable: Workpieces with pre-assembled fittings remain stackable for easy storage or transportation Versatile: The small depth of the connector allows mitre cuts of 22.5 to 180°, such as for surface, corner and partition joints ds: dsc: kts: cabinet connectors (80 pcs) kpn: TENSO P-14 kpn_dash: TENSO P kpn_clear: TENSOP14 bkpn: LAMELLO TENSO P-14 bkpn_clear: LAMELLO TENSOP14 c_path: Home / Fasteners and machine components / Fasteners / Wood joints / Biscuit joint | Home / Our brands / Lamello / Lamello fasteners and machine components / Lamello fasteners / Lamello wood joints / Lamello biscuit joint sr_no_br_cl_ns: 145415 sr_ns: LAMELLO145415
r: 02368788 p: 27.933 pid: 103778 b: LAMELLO q: 128 st: 1 lt: 1 ean: 7640108022332 sr: LAMELLO 144020 sr_no_br: 144020 sr_no_br_cl: 144020 sr_cl: LAMELLO144020 sr_dash: sold: 29832.444 p_range: none type: standard act: 1 avo: 1 av: Width 56 mm Thickness 4 mm Quantity per box 1000 Length 23 mm n: LAMELLO 144020 wooden slats size 20 (1000 pcs) cn: BISCUIT JOIN cn2: BISCUIT JOIN cn_clear: BISCUITJOIN d: Product description Original wooden slat for joints in wood and panel materials Proven system for corner and mitre joints from 22.5° to 180° Four sizes for a wide range of applications Optimised surface structure for perfect fitting accuracy and glue distribution Ideal for various applications in furniture construction and interior design Lamello's original wooden slat is the proven joining solution of the system's inventor. Since its invention in 1955, the lamello, also known as a flat dowel, has been used millions of times to join wooden workpieces. The success of the wooden slat is due to its simple, fast application, stable, high-quality connection, large longitudinal tolerance and minimal weakening of the material which is important for sheet materials. The original guarantees quality in the form of dimensional stability, optimum glue distribution, shape stability and high fracture resistance. Native, sustainable beech wood is supplied from the vicinity of the Bubendorf production site, where it is carefully sorted and processed. During stamping, the thickness of the wooden slats is checked several times an hour to ensure the right fit for the application. Thanks to this precise fit, the wooden slats fit easily into a 4 mm groove and do not fall out when the workpiece is turned over during assembly. The slightly raised guides on the flat dowel reduce resistance when sliding in and keep the joining element in the groove. The recessed surface is intended to provide a stronger compressed glue surface on which the glue can spread. As the glue cures, the wooden slat in the glued area expands further for an even more stable joint. The diagonal grain also ensures a very high fracture resistance. The rounded, smooth edges simplify insertion and increase comfort while working. Applications Precise wood joints in all corners in joinery Ideal connector for sheet material, as the material is weakened less than with a dowel Milling for joint sizes 0, 10 and 20 with the groove cutter Top21 or Classic X with 4-mm groove cutter Routing for joint size H9 with the groove cutter Top21 or Classic X with 3-mm groove cutter Blunt joints from a material thickness of 8 mm (H9 wood plywood) Mitre joints from a material thickness of 8 mm (H9 wood plywood) Properties Perfect fit: The precision of the joining elements and the 4 mm groove ensure a perfect fit Relief glue surfaces: Raised guide bars and embossed glue surfaces for optimum glue distribution and low resistance during assembly Round edges: Easy to fit into the groove Sliding tolerance in the profile groove: With the Lamello system, both workpieces can be aligned perfectly flat Versatile: The small depth of the connector allows mitre cuts of 22.5 to 180°, such as for surface, corner and intermediate wall joints ds: dsc: kts: wooden slats size 20 (1000 pcs) kpn: 144020 kpn_dash: kpn_clear: 144020 bkpn: LAMELLO 144020 bkpn_clear: LAMELLO 144020 c_path: Home / Fasteners and machine components / Fasteners / Wood joints / Biscuit joint | Home / Our brands / Lamello / Lamello fasteners and machine components / Lamello fasteners / Lamello wood joints / Lamello biscuit joint sr_no_br_cl_ns: 144020 sr_ns: LAMELLO144020
r: 02896894 p: 242.809 pid: 103107 b: LAMELLO q: 0 st: lt: 6 ean: 7640149932034 sr: LAMELLO 145425S sr_no_br: 145425S sr_no_br_cl: 145425S sr_cl: LAMELLO145425S sr_dash: sold: 24766.518 p_range: none type: standard act: 1 avo: 1 av: n: LAMELLO TENSO P-14 cabinet connector starter kit incl. pre-tensioning clip (300 pairs) - 145425S cn: BISCUIT JOIN cn2: BISCUIT JOIN cn_clear: BISCUITJOIN d: Product description Self-locking connector for gluing, installed in seconds Invisible joint for maximum aesthetics Clamping function, ideal for mitres and joints from 22.5° to 180° High clamping force for perfectly clamped joints without screw clamps and clamping aids Glueing tool for a wide range of applications in furniture or interior design Tenso P-14 is a self-tensioning connector for gluing wood materials and is anchored in the interlocking P-System grooves in the workpiece within seconds. Tenso P-14 consists of a joining half with powerful tension springs. These anchor themselves in the counterpiece and exert high pressure on the joint. Thanks to this high tension force, the user can bond furniture parts or wood materials without clamps, bobbins, tape or presses. The Tenso presses the joints together at the correct angle, always perpendicular to the cutting angle of the two workpieces. With the Tenso P-14, the user can bond workpieces tremendously fast and save time during the entire production process: efficient milling of the P-System grooves, inserting the connectors by hand and without glue or screws, applying glue and assembling workpieces afterwards. There is no need to wait and an assembled workpiece can immediately be further processed or prepared for shipment. Tenso P-14 is completely concealed, allowing workpieces to be manufactured with perfect aesthetics without a visible joint. Like the tried-and-tested Lamello system, the connector can be used at virtually any joint angle. This means that obtuse, pointed or flat corners can be joined. The connector is therefore often used as a gluing aid for workpieces that are difficult to clamp. The pre-tensioning clamp can possibly be used when mitre joints have to be glued or when, for larger parts, several connectors have to be mounted in succession at the same time. The prestressing clamp increases lateral clearance when assembling and reduces the force required to join the Tenso P-14. Blunt joints from a material thickness of 15 mm. Mitre joints from a material thickness of 18 mm. Applications Self-tensioning furniture connector for gluing in kitchen, furniture or interior design Glueing aid for difficult to clamp joints, e.g. counters or wall panels in interior design. Gluing of pillar panelling Furniture with mitre joints on five sides More complex furniture can be glued and assembled piece by piece instead of applying glue to all workpieces and clamping the furniture with clamps under time pressure Dry joints before gluing with Bisco P-14 Blunt joints from a material thickness of 15 mm Mitre joints from a material thickness of 18 mm Properties High clamping force: Can be perfectly aligned and draws workpieces together Bonding: Time-saving joining without using clamps and waiting for the glue to dry Invisible: Fully hidden connection panels for the highest demands Stackable: Workpieces with pre-assembled fittings remain stackable for easy storage or transportation Versatile: The small depth of the connector allows mitre cuts of 22.5 to 180°, such as for surface, corner and partition joints ds: dsc: kts: cabinet connector starter kit incl. pre-tensioning clip (300 pairs) kpn: TENSO P-14 kpn_dash: TENSO P kpn_clear: TENSOP14 bkpn: LAMELLO TENSO P-14 bkpn_clear: LAMELLO TENSOP14 c_path: Home / Fasteners and machine components / Fasteners / Wood joints / Biscuit joint | Home / Our brands / Lamello / Lamello fasteners and machine components / Lamello fasteners / Lamello wood joints / Lamello biscuit joint sr_no_br_cl_ns: 145425S sr_ns: LAMELLO145425S
r: 03153754 p: 343.636 pid: 103117 b: LAMELLO q: 0 st: lt: 10 ean: 7640149938364 sr: LAMELLO 145316 sr_no_br: 145316 sr_no_br_cl: 145316 sr_cl: LAMELLO145316 sr_dash: sold: 18899.98 p_range: none type: standard act: 1 avo: 1 av: Width 66 mm Thickness 9,7 mm Quantity per box 300 Length 27 mm n: LAMELLO CLAMEX P-14 FLEXUS cabinet connectors in box (300 pcs) - 145316 cn: BISCUIT JOIN cn2: BISCUIT JOIN cn_clear: BISCUITJOIN d: Product description Removable furniture connector, installed in seconds Flexible positioning pins for retrofitting shelves Aesthetic appearance with the barely visible 6 mm drill hole All-rounder for all corner and mitre joints from 22.5° to 180° Ideal for furniture construction, sideboards, wine racks, inspection flaps Clamex P-14/10 Flexus is a demountable furniture connector that is fitted into the workpiece within seconds using the groove milling machine Zeta P2. With a minimalist operating opening of 6 mm, the Clamex P-14/10 Flexus is powerfully connected and disconnected just like an eccentric joiner via a lever. The Clamex P-14/10 Flexus was developed to complement the Clamex P-14 and offers the same benefits. These include high aesthetics thanks to the almost hidden connections, the small access bore, mitred connections at different angles and the powerfully connected yet detachable connectors. Unlike the Clamex P-14, the Clamex P-14/10 Flexus does not have rigid positioning pins. They are flexible and have beveled edges on both sides. This allows a workpiece to be inserted between two sides, snapped into place and removed again. Thanks to this feature, extendable shelves or sloping shelves can be inserted after the furniture has already been assembled. As the positioning pins engage when inserted, the extendable shelf is held in the correct position until the workpieces are connected with an Allen key. When connecting a complex piece of furniture with several vertical and horizontal workpieces, the order in which the furniture parts are assembled plays no role. The positioning pins also provide wring resistance when only one connector can be used, such as for a plinth. This eliminates the need to use dowels, as is normally the case with eccentric connectors. Applications Removable connecting fittings for sheet materials in furniture construction Connecting blocks with six sides at mitre Concealed installation of revision valves In interior construction in built-in cupboards, wardrobes under stairs or sloping roofs In kitchen construction in wine racks frame constructions or open shelves In furniture construction for high-quality furniture with mitred corners or unusual angles, wine racks or bookcases Blunt joints from a material thickness of 12 mm Mitred joints from a material thickness of 18 mm Features Dismountable: Always detachable with the rotating lever Aesthetic: the small, barely visible opening (Ø = 6 mm) serves to open and close the connector Flexible assembly sequence: Movable positioning bolts allow a freely selectable assembly sequence Versatile: the small depth of the connector allows mitre cuts of 22.5 to 180°, e.g. for surface, corner and intermediate wall connections Versatile assembly: bevelled and movable positioning bolts allow the workpiece to be moved inwards and outwards on both sides ds: dsc: kts: cabinet connectors in box (300 pcs) kpn: CLAMEX P-14 FLEXUS kpn_dash: CLAMEX P kpn_clear: CLAMEXP14FLEXUS bkpn: LAMELLO CLAMEX P-14 FLEXUS bkpn_clear: LAMELLO CLAMEXP14FLEXUS c_path: Home / Fasteners and machine components / Fasteners / Wood joints / Biscuit joint | Home / Our brands / Lamello / Lamello fasteners and machine components / Lamello fasteners / Lamello wood joints / Lamello biscuit joint sr_no_br_cl_ns: 145316 sr_ns: LAMELLO145316
r: 03204353 p: 98.181 pid: 102979 b: LAMELLO q: 3 st: 1 lt: 1 ean: 7640149938371 sr: LAMELLO 145315 sr_no_br: 145315 sr_no_br_cl: 145315 sr_cl: LAMELLO145315 sr_dash: sold: 13745.34 p_range: none type: standard act: 1 avo: 1 av: n: LAMELLO CLAMEX P-14 FLEXUS cabinet connectors in box (80 pcs) - 145315 cn: BISCUIT JOIN cn2: BISCUIT JOIN cn_clear: BISCUITJOIN d: Product description Removable furniture connector, installed in seconds Flexible positioning pins for retrofitting shelves Aesthetic appearance with the barely visible 6 mm drill hole All-rounder for all corner and mitre joints from 22.5° to 180° Ideal for furniture construction, sideboards, wine racks, inspection flaps Clamex P-14/10 Flexus is a demountable furniture connector that is fitted into the workpiece within seconds using the groove milling machine Zeta P2. With a minimalist operating opening of 6 mm, the Clamex P-14/10 Flexus is powerfully connected and disconnected just like an eccentric joiner via a lever. The Clamex P-14/10 Flexus was developed to complement the Clamex P-14 and offers the same benefits. These include high aesthetics thanks to the almost hidden connections, the small access bore, mitred connections at different angles and the powerfully connected yet detachable connectors. Unlike the Clamex P-14, the Clamex P-14/10 Flexus does not have rigid positioning pins. They are flexible and have beveled edges on both sides. This allows a workpiece to be inserted between two sides, snapped into place and removed again. Thanks to this feature, extendable shelves or sloping shelves can be inserted after the furniture has already been assembled. As the positioning pins engage when inserted, the extendable shelf is held in the correct position until the workpieces are connected with an Allen key. When connecting a complex piece of furniture with several vertical and horizontal workpieces, the order in which the furniture parts are assembled plays no role. The positioning pins also provide wring resistance when only one connector can be used, such as for a plinth. This eliminates the need to use dowels, as is normally the case with eccentric connectors. Applications Removable connecting fittings for sheet materials in furniture construction Connecting blocks with six sides at mitre Concealed installation of revision valves In interior construction in built-in cupboards, wardrobes under stairs or sloping roofs In kitchen construction in wine racks frame constructions or open shelves In furniture construction for high-quality furniture with mitred corners or unusual angles, wine racks or bookcases Blunt joints from a material thickness of 12 mm Mitred joints from a material thickness of 18 mm Features Dismountable: Always detachable with the rotating lever Aesthetic: the small, barely visible opening (Ø = 6 mm) serves to open and close the connector Flexible assembly sequence: Movable positioning bolts allow a freely selectable assembly sequence Versatile: the small depth of the connector allows mitre cuts of 22.5 to 180°, e.g. for surface, corner and intermediate wall connections Versatile assembly: bevelled and movable positioning bolts allow the workpiece to be moved inwards and outwards on both sides ds: dsc: kts: cabinet connectors in box (80 pcs) kpn: CLAMEX P-14 FLEXUS kpn_dash: CLAMEX P kpn_clear: CLAMEXP14FLEXUS bkpn: LAMELLO CLAMEX P-14 FLEXUS bkpn_clear: LAMELLO CLAMEXP14FLEXUS c_path: Home / Fasteners and machine components / Fasteners / Wood joints / Biscuit joint | Home / Our brands / Lamello / Lamello fasteners and machine components / Lamello fasteners / Lamello wood joints / Lamello biscuit joint sr_no_br_cl_ns: 145315 sr_ns: LAMELLO145315
r: 02368743 p: 154.71 pid: 104680 b: LAMELLO q: 2 st: 1 lt: 1 ean: 7640129663514 sr: LAMELLO 145236 sr_no_br: 145236 sr_no_br_cl: 145236 sr_cl: LAMELLO145236 sr_dash: sold: 10984.41 p_range: none type: standard act: 1 avo: 1 av: Width 66 mm Thickness 8 mm Quantity per box 80 Length 29 mm n: LAMELLO CLAMEX S-18 cabinet connectors (80 pcs) - 145236 cn: BISCUIT JOIN cn2: BISCUIT JOIN cn_clear: BISCUITJOIN d: Product description Removable furniture connector 8 mm thick, fixed with screws Aesthetic appearance with the barely visible 6 mm access hole All corner and mitre joints from 22.5° to 180° High clamping force for perfectly closed joints Ideal for open shelves, cupboards or wardrobes under sloping ceilings Clamex S-18 is a removable connector for the Lamello system and is screwed into an 8 mm wide groove. With its minimalist operating opening of 6 mm, Clamex S-18 is powerfully connected and released via a lever, similar to an eccentric connecting fitting. Clamex S-18 is highly aesthetic thanks to its small operating opening of only 6 mm diameter and allows almost completely concealed connections. Glue is not required. Aesthetic joints are possible at all angles and it is ideal for fixed or dismountable joints. The Clamex S-18 requires an 8 mm-wide groove, which can be milled at milling depth D (15 mm) and can be done with any Lamello grooving machine. With the 8 mm-wide Clamex groove router, it can be done in one milling operation. With the standard milling cutter (4 mm), two milling operations are required, with the second milling operation being offset by 4 mm using an insert plate. A drilling jig is used for the access hole, which allows the hole to be drilled at all angles from 22.5°-180°. Next, the removable connector is inserted into the workpieces and secured with two standard screws. Finally, the two workpieces are connected with an Allen key. Waiting for the adhesive to dry is thus not necessary and an assembled workpiece can immediately be further processed or prepared for shipment. Applications Dismountable connecting fittings for sheet materials Glueing aid for mitred joints or corners that are difficult to tension In kitchen construction in open shelves or kitchen worktops HPL In interior construction for built-in cupboards, wardrobes under stairs or sloping roofs In furniture construction for high-quality furniture with mitred joints or unusual angles, wine racks or bookcases Mitred joints from a material thickness of 19 mm Mitred joints from a material thickness of 18 mm Features Dismountable: Always detachable with the rotating lever Aesthetic: the small, barely visible opening (Ø = 6 mm) serves to open and close the connector High clamping force: For clamping and gluing workpieces at any angle ~ 80 kg Stackable: Workpieces with pre-assembled fittings remain stackable for easy storage or transportation Versatile: The small depth of the connector allows mitre cuts of 22.5 to 180°, such as for surface, corner and partition joints ds: dsc: kts: cabinet connectors (80 pcs) kpn: CLAMEX S-18 kpn_dash: CLAMEX S kpn_clear: CLAMEXS18 bkpn: LAMELLO CLAMEX S-18 bkpn_clear: LAMELLO CLAMEXS18 c_path: Home / Fasteners and machine components / Fasteners / Wood joints / Biscuit joint | Home / Our brands / Lamello / Lamello fasteners and machine components / Lamello fasteners / Lamello wood joints / Lamello biscuit joint sr_no_br_cl_ns: 145236 sr_ns: LAMELLO145236
r: 02368780 p: 27.438 pid: 103771 b: LAMELLO q: 18 st: 1 lt: 1 ean: 7640108022301 sr: LAMELLO 144010 sr_no_br: 144010 sr_no_br_cl: 144010 sr_cl: LAMELLO144010 sr_dash: sold: 10097.184 p_range: none type: standard act: 1 avo: 1 av: Width 53 mm Thickness 4 mm Quantity per box 1000 Length 19 mm n: LAMELLO 144010 wooden slats size 10 (1000 pcs) cn: BISCUIT JOIN cn2: BISCUIT JOIN cn_clear: BISCUITJOIN d: Product description Original wooden slat for joints in wood and panel materials Proven system for corner and mitre joints from 22.5° to 180° Four sizes for a wide range of applications Optimised surface structure for perfect fitting accuracy and glue distribution Ideal for various applications in furniture construction and interior design Lamello's original wooden slat is the proven joining solution of the system's inventor. Since its invention in 1955, the lamello, also known as a flat dowel, has been used millions of times to join wooden workpieces. The success of the wooden slat is due to its simple, fast application, stable, high-quality connection, large longitudinal tolerance and minimal weakening of the material which is important for sheet materials. The original guarantees quality in the form of dimensional stability, optimum glue distribution, shape stability and high fracture resistance. Native, sustainable beech wood is supplied from the vicinity of the Bubendorf production site, where it is carefully sorted and processed. During stamping, the thickness of the wooden slats is checked several times an hour to ensure the right fit for the application. Thanks to this precise fit, the wooden slats fit easily into a 4 mm groove and do not fall out when the workpiece is turned over during assembly. The slightly raised guides on the flat dowel reduce resistance when sliding in and keep the joining element in the groove. The recessed surface is intended to provide a stronger compressed glue surface on which the glue can spread. As the glue cures, the wooden slat in the glued area expands further for an even more stable joint. The diagonal grain also ensures a very high fracture resistance. The rounded, smooth edges simplify insertion and increase comfort during work. Applications Precise wood joints in all corners in joinery Ideal connector for sheet material, as the material is weakened less than with a dowel Milling for joint sizes 0, 10 and 20 with the groove cutter Top21 or Classic X with 4-mm groove cutter Routing for joint size H9 with the groove cutter Top21 or Classic X with 3-mm groove cutter Blunt joints from a material thickness of 8 mm (H9 wood plywood) Mitre joints from a material thickness of 8 mm (H9 wood plywood) Properties Perfect fit: The precision of the joining elements and the 4 mm groove ensure a perfect fit Relief glue surfaces: Raised guide bars and embossed glue surfaces for optimal glue distribution and low resistance during assembly Round edges: Easy to fit into the groove Sliding tolerance in the profile groove: With the Lamello system, both workpieces can be aligned perfectly flat Versatile: The small depth of the connector allows mitre cuts of 22.5 to 180°, such as for surface, corner and intermediate wall joints ds: dsc: kts: wooden slats size 10 (1000 pcs) kpn: 144010 kpn_dash: kpn_clear: 144010 bkpn: LAMELLO 144010 bkpn_clear: LAMELLO 144010 c_path: Home / Fasteners and machine components / Fasteners / Wood joints / Biscuit joint | Home / Our brands / Lamello / Lamello fasteners and machine components / Lamello fasteners / Lamello wood joints / Lamello biscuit joint sr_no_br_cl_ns: 144010 sr_ns: LAMELLO144010
r: 02653897 p: 97.19 pid: 105165 b: LAMELLO q: 2 st: 1 lt: 1 ean: 7640149930276 sr: LAMELLO 145370 sr_no_br: 145370 sr_no_br_cl: 145370 sr_cl: LAMELLO145370 sr_dash: sold: 9621.81 p_range: none type: standard act: 1 avo: 1 av: Width 66/52 mm Thickness 9,7 mm Quantity per box 80 Length 14,5/7,5 mm n: LAMELLO CLAMEX P-MEDIUS cabinet connectors (80 pcs) - 145370 cn: BISCUIT JOIN cn2: BISCUIT JOIN cn_clear: BISCUITJOIN d: Product description Removable furniture connector, installed in seconds Supplement to Clamex P-14 for mid-wall joints from 16 mm upwards Aesthetic appearance with the barely visible 6 mm drill hole High clamping force for perfectly sealed joints Ideal for middle wall joints in sideboards, shelves or cupboards Clamex P-14/10 Medius is a removable furniture connector that anchors in interlocking P-System grooves within seconds. With a minimalist operating opening of 6 mm, it is connected and disconnected via a lever just like an eccentric connector. The Clamex P-14/10 Medius was developed to complement the Clamex P-14 and offers the same benefits. These include high aesthetics thanks to the almost hidden connections, the small access bore, mitre joints at different angles and the powerfully connected yet detachable connectors. The Clamex P-14/10 Medius is distinguished only by connection halves of different sizes. If two pull-out shelves connect to a middle wall at the same height, the connecting half with size P-10 can be pushed into the middle wall from both sides. The crescent-shaped recesses on the back of the connecting halves allow joining middle walls from 16 mm upwards. With the Clamex P-14, a centre wall of 28 mm is required in this case. This makes the Clamex P-14/10 Medius the ideal solution for the middle walls of a piece of furniture.Mitre joints from a material thickness of 18 mm onwards Applications Concealed intermediate wall joints from 16 mm with two pull-out shelves Dismountable connecting fittings for panel materials in furniture construction Glueing aid for mitred joints or corners that are difficult to tighten In furniture construction for high-quality furniture with mitred joints or unusual angles, wine racks or bookcases. Powerful alternative to connection fittings standards Rapid construction of prototypes for the start of a new furniture series Mitre joints from a material thickness of 12 mm Mitre joints from a material thickness of 18 mm Features Dismountable: Always detachable with the rotating lever Aesthetic: The small, barely visible opening (Ø = 6 mm), serves for opening and closing the connector Groove overlapping installation: minimum routing depth allows connections from 16 mm and up for intermediate panels Quick installation: Push-in instead of screwing or gluing, in the blink of an eye and without waiting times Stackable: Workpieces with pre-assembled fittings remain stackable for easy storage or transportation ds: dsc: kts: cabinet connectors (80 pcs) kpn: CLAMEX P-MEDIUS kpn_dash: CLAMEX P kpn_clear: CLAMEXPMEDIUS bkpn: LAMELLO CLAMEX P-MEDIUS bkpn_clear: LAMELLO CLAMEXPMEDIUS c_path: Home / Fasteners and machine components / Fasteners / Wood joints / Biscuit joint | Home / Our brands / Lamello / Lamello fasteners and machine components / Lamello fasteners / Lamello wood joints / Lamello biscuit joint sr_no_br_cl_ns: 145370 sr_ns: LAMELLO145370
r: 02936722 p: 1105.95 pid: 83406 b: LAMELLO q: 0 st: lt: 10 ean: 7640149930269 sr: LAMELLO 145356 sr_no_br: 145356 sr_no_br_cl: 145356 sr_cl: LAMELLO145356 sr_dash: sold: 8847.6 p_range: none type: standard act: 1 avo: 1 av: Width 27 cm Thickness 17,5 cm Length 38,5 cm n: LAMELLO Clamex P-14 demountable cabinet connectors (1000 pairs) - 145356 cn: BISCUIT JOIN cn2: BISCUIT JOIN cn_clear: BISCUITJOIN d: Product description Removable furniture connector, installed in seconds Aesthetic appearance with the barely visible 6 mm drill hole All-rounder for all corner and mitre joints from 22.5° to 180° High clamping force for perfectly closed joints Ideal for open shelves, cupboards or wardrobes under sloping ceilings Clamex P-14 is a demountable furniture connector and is anchored into the workpiece within seconds with the interlocking P-System grooves. With its minimalist operating opening of 6 mm, Clamex P-14 is powerfully joined and released via a lever, similar to an eccentric joiner. Clamex P-14 is highly aesthetic thanks to its small operating aperture of only 6 mm diameter and allows almost completely hidden connections. Clamex P-14 is designed for butt joints and as a mitre connector. It is also distinguished by a very time-saving production process. The P-System grooves are precisely manufactured either with the groove milling machine Zeta P2 or with a CNC machine. The connectors are then effortlessly pushed into the grooves, the workpieces seamlessly joined and powerfully connected by lightly pressing the lever. So there is no need to wait and an assembled workpiece can immediately be further processed or prepared for shipment. With Clamex P-14, wood joints can be joined at almost any angle and mitre, as with the tried-and-tested Lamello system. Unlike an eccentric, obtuse, pointed or flat corners can also be assembled and powerfully joined. Therefore, the joiner is also often used as a gluing aid for difficult to clamp workpieces. Applications Removable connecting fittings for sheet materials in furniture construction Gluing aid for mitred joints or corners that are difficult to stretch In kitchen construction in tall units, frame constructions or open shelves In interior construction for built-in cupboards, wardrobes under stairs or sloping roofs In furniture construction for high-quality furniture with mitred joints or unusual angles, wine racks or bookcases Powerful alternative to connection fittings standards Rapid construction of prototypes for the start of a new furniture series Blunt joints from a material thickness of 15 mm Mitre joints from a material thickness of 18 mm Features Dismountable: Always detachable with the rotating lever Aesthetic: the small, barely visible opening (Ø = 6 mm) serves to open and close the connector Quick assembly: Sliding in instead of screwing or gluing, in the blink of an eye and without waiting times Stackable: Workpieces with pre-assembled fittings remain stackable for easy storage or transportation Versatile: the small depth of the connector allows mitres of 22.5 to 180°, such as for surface, corner and intermediate wall joints ds: dsc: kts: demountable cabinet connectors (1000 pairs) kpn: Clamex P-14 kpn_dash: Clamex P kpn_clear: ClamexP14 bkpn: LAMELLO Clamex P-14 bkpn_clear: LAMELLO ClamexP14 c_path: Home / Fasteners and machine components / Fasteners / Wood joints / Biscuit joint | Home / Our brands / Lamello / Lamello fasteners and machine components / Lamello fasteners / Lamello wood joints / Lamello biscuit joint sr_no_br_cl_ns: 145356 sr_ns: LAMELLO145356
r: 02651442 p: 116.198 pid: 125678 b: LAMELLO q: 0 st: lt: 6 ean: 7640149931457 sr: LAMELLO 145550S sr_no_br: 145550S sr_no_br_cl: 145550S sr_cl: LAMELLO145550S sr_dash: sold: 5693.702 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Width 75 mm Thickness 9,7 mm Quantity per box 80 n: LAMELLO DIVARIO P-18 cabinet connectors (80 pcs) + assembly tool - 145550S cn: BISCUIT JOIN cn2: BISCUIT JOIN cn_clear: BISCUITJOIN d: Product description Furniture connectors for later insertion of shelves or partitions Quick on-site installation - Insert. Ready. Divario P-18 perfectly tightens the joint during insertion Invisible joint for maximum aesthetics Ideal for wall cabinets, wine racks, large furniture, flat-pack furniture Divario P-18 is a removable furniture connector for sliding in. The groove is milled with the groove milling machine Zeta P2 or a CNC machining centre and the connector is anchored into the workpiece within seconds with interlocking P-System grooves. When inserted, the Divario P-18 clamps the workpieces together, ensuring neatly closed joints. The tension build-up occurs only at specific points and not over the entire insertion length, simplifying insertion. As no lever or eccentric has to be operated, assembly is very efficient and the connector is invisible. if a piece of furniture or a shelf is made with several fixed pull-out shelves or partitions, the Divario P-18 can be used to connect the outer frame first. Then the inner parts, i.e. partitions or structural floors, are inserted piece by piece. Thus, a book wall can be transported in individual parts or only as a simple frame to save space and reduce weight. On site, the shelves are simply pushed into place. Due to the force-locked connection between the components, the joint can handle high tensile forces. For example, a vertical centre beam can stably connect the bottom of a hanging shelf and carry the load. A groove is milled in the front of the pull-out shelf so that the workpiece can be slid over the protruding connection half in the side. The small groove at the back of the board can be distracting when making a board visible from both sides. For this purpose, a longitudinal groove is applied on both sides so that the joint is completely hidden on all sides. In this application, the pull-out shelf is not retracted afterwards, but is placed on it during rack assembly and shifted until it clicks into place. Applications Self-tensioning furniture connector for sliding in shelves or vertical centre partitions Combination with Clamex P or Tenso P, which are used for corner joints In kitchen construction in tall units, frame constructions or open shelves In interior fitting construction for pull-out shelves in built-in cupboards In furniture construction for high-quality furniture, wine racks or bookcases Powerful alternative to connecting hardware standards Partitions from a material thickness of 18 mm Pull-out shelves from a material thickness of 12 mm Properties Insertion: Insertion of panel between two fixed sides using guide groove Clamp joints: Resistance-free sliding in, until shortly before tension build-up Invisible: Guide groove applied on one side hides connecting elements Insert and slide: guide groove on both sides for completely invisible furniture connection Fast assembly: quick fitting of the connector without glue after transport ds: dsc: kts: cabinet connectors (80 pcs) + assembly tool kpn: DIVARIO P-18 kpn_dash: DIVARIO P kpn_clear: DIVARIOP18 bkpn: LAMELLO DIVARIO P-18 bkpn_clear: LAMELLO DIVARIOP18 c_path: Home / Fasteners and machine components / Fasteners / Wood joints / Biscuit joint | Home / Our brands / Lamello / Lamello fasteners and machine components / Lamello fasteners / Lamello wood joints / Lamello biscuit joint sr_no_br_cl_ns: 145550S sr_ns: LAMELLO145550S
r: 02368792 p: 74.545 pid: 105162 b: LAMELLO q: 2 st: 1 lt: 1 ean: 7640108022486 sr: LAMELLO 145000 sr_no_br: 145000 sr_no_br_cl: 145000 sr_cl: LAMELLO145000 sr_dash: sold: 5665.42 p_range: none type: standard act: 1 avo: 1 av: Width 60 mm Thickness 4,5 mm Quantity per box 250 Length 24 mm n: LAMELLO 145000 K20 PVC red adhesive strips (250 pcs.) cn: BISCUIT JOIN cn2: BISCUIT JOIN cn_clear: BISCUITJOIN d: Product description Adhesive laminate in size 20 for gluing Lateral fixing ribs hold parts in place Application in combination with wooden slats for high joint strength All corner and mitre joints from 22.5° to 180° Ideal for screens or covers K20 is a bonding slat with the same format as the original size 20 wood slat. The furniture connector K20 has barbs on the sides which are anchored in the 4 mm groove when inserted. The bonding slat is ideal for difficult-to-stretch workpieces such as panels or covers. It holds workpieces in the correct position until the glue dries. Since the glue does not adhere to the plastic surface, it is useful to alternate between wooden slats and K20 slats. The K20 slats also hold the part in place and the wooden slat gives the wood joint the final strength. The 4 mm groove can be milled at almost any angle with any Lamello groove router. Applications Precise wood joints in all corners for joinery Ideal connector for board material, as the material is weakened less than with a dowel On-site mounting aid for panels or covers Blunt joints from a material thickness of 13 mm onwards Features Flexible combining: Ideal combination with wooden slats for a strong joint Perfect fit: The precision of the connection elements and the 4 mm groove ensure a perfect fit Sliding tolerance in the profile groove: With the Lamello system, both workpieces can be aligned perfectly flat Versatile: The small depth of the connector allows mitre cuts of 22.5 to 180°, such as for surface, corner and intermediate wall joints Weather hooks on sides: Anchoring during insertion keeps the workpiece in the correct position until the glue is dry ds: dsc: kts: K20 PVC red adhesive strips (250 pcs.) kpn: 145000 kpn_dash: kpn_clear: 145000 bkpn: LAMELLO 145000 bkpn_clear: LAMELLO 145000 c_path: Home / Fasteners and machine components / Fasteners / Wood joints / Biscuit joint | Home / Our brands / Lamello / Lamello fasteners and machine components / Lamello fasteners / Lamello wood joints / Lamello biscuit joint sr_no_br_cl_ns: 145000 sr_ns: LAMELLO145000
r: 02368789 p: 26.942 pid: 104357 b: LAMELLO q: 1 st: 1 lt: 1 ean: 7640108022233 sr: LAMELLO 144000 sr_no_br: 144000 sr_no_br_cl: 144000 sr_cl: LAMELLO144000 sr_dash: sold: 4768.734 p_range: none type: standard act: 1 avo: 1 av: Width 47 mm Thickness 4 mm Quantity per box 1000 Length 15 mm n: LAMELLO 144000 wooden slats size 0 (1000 pcs) cn: BISCUIT JOIN cn2: BISCUIT JOIN cn_clear: BISCUITJOIN d: Product description Original wooden slat for joints in wood and panel materials Proven system for corner and mitre joints from 22.5° to 180° Four sizes for a wide range of applications Optimised surface structure for perfect fitting accuracy and glue distribution Ideal for various applications in furniture construction and interior design Lamello's original wooden slat is the proven joining solution of the system's inventor. Since its invention in 1955, the lamello, also known as a flat dowel, has been used millions of times to join wooden workpieces. The success of the wooden slat is due to its simple, fast application, stable, high-quality connection, large longitudinal tolerance and minimal weakening of the material which is important for sheet materials. The original guarantees quality in the form of dimensional stability, optimum glue distribution, shape stability and high fracture resistance. Native, sustainable beech wood is supplied from the vicinity of the Bubendorf production site, where it is carefully sorted and processed. During stamping, the thickness of the wooden slats is checked several times an hour to ensure the right fit for the application. Thanks to this precise fit, the wooden slats fit easily into a 4 mm groove and do not fall out when the workpiece is turned over during assembly. The slightly raised guides on the flat dowel reduce resistance when sliding in and keep the joining element in the groove. The recessed surface is intended to provide a stronger compressed glue surface on which the glue can spread. As the glue cures, the wooden slat in the glued area expands further for an even more stable joint. The diagonal grain also ensures a very high fracture resistance. The rounded, smooth edges simplify insertion and increase comfort while working. Applications Precise wood joints in all corners in joinery Ideal connector for sheet material, as the material is weakened less than with a dowel Milling for joint sizes 0, 10 and 20 with the groove cutter Top21 or Classic X with 4-mm groove cutter Routing for joint size H9 with the groove cutter Top21 or Classic X with 3-mm groove cutter Blunt joints from a material thickness of 8 mm (H9 wood plywood) Mitre joints from a material thickness of 8 mm (H9 wood plywood) Properties Perfect fit: The precision of the joining elements and the 4 mm groove ensure a perfect fit Relief glue surfaces: Raised guide bars and embossed glue surfaces for optimal glue distribution and low resistance during assembly Round edges: Easy to fit into the groove Sliding tolerance in the profile groove: With the Lamello system, both workpieces can be aligned perfectly flat Versatile: The small depth of the connector allows mitre cuts of 22.5 to 180°, such as for surface, corner and intermediate wall joints ds: dsc: kts: wooden slats size 0 (1000 pcs) kpn: 144000 kpn_dash: kpn_clear: 144000 bkpn: LAMELLO 144000 bkpn_clear: LAMELLO 144000 c_path: Home / Fasteners and machine components / Fasteners / Wood joints / Biscuit joint | Home / Our brands / Lamello / Lamello fasteners and machine components / Lamello fasteners / Lamello wood joints / Lamello biscuit joint sr_no_br_cl_ns: 144000 sr_ns: LAMELLO144000
r: 03204354 p: 1095.826 pid: 102982 b: LAMELLO q: 0 st: lt: 8 ean: 7640149938388 sr: LAMELLO 145317 sr_no_br: 145317 sr_no_br_cl: 145317 sr_cl: LAMELLO145317 sr_dash: sold: 2191.652 p_range: none type: standard act: 1 avo: 1 av: n: LAMELLO CLAMEX P-14 FLEXUS cabinet connectors in box (1000 pcs) - 145317 cn: BISCUIT JOIN cn2: BISCUIT JOIN cn_clear: BISCUITJOIN d: Product description Removable furniture connector, installed in seconds Flexible positioning pins for retrofitting shelves Aesthetic appearance with the barely visible 6 mm drill hole All-rounder for all corner and mitre joints from 22.5° to 180° Ideal for furniture construction, sideboards, wine racks, inspection flaps Clamex P-14/10 Flexus is a demountable furniture connector that is fitted into the workpiece within seconds using the groove milling machine Zeta P2. With a minimalist operating opening of 6 mm, the Clamex P-14/10 Flexus is powerfully connected and disconnected just like an eccentric joiner via a lever. The Clamex P-14/10 Flexus was developed to complement the Clamex P-14 and offers the same benefits. These include high aesthetics thanks to the almost hidden connections, the small access bore, mitred connections at different angles and the powerfully connected yet detachable connectors. Unlike the Clamex P-14, the Clamex P-14/10 Flexus does not have rigid positioning pins. They are flexible and have beveled edges on both sides. This allows a workpiece to be inserted between two sides, snapped into place and removed again. Thanks to this feature, extendable shelves or sloping shelves can be inserted after the furniture has already been assembled. As the positioning pins engage when inserted, the extendable shelf is held in the correct position until the workpieces are connected with an Allen key. When connecting a complex piece of furniture with several vertical and horizontal workpieces, the order in which the furniture parts are assembled plays no role. The positioning pins also provide wring resistance when only one connector can be used, such as for a plinth. This eliminates the need to use dowels, as is normally the case with eccentric connectors. Applications Removable connecting fittings for sheet materials in furniture construction Connecting blocks with six sides at mitre Concealed installation of revision valves In interior construction in built-in cupboards, wardrobes under stairs or sloping roofs In kitchen construction in wine racks frame constructions or open shelves In furniture construction for high-quality furniture with mitred corners or unusual angles, wine racks or bookcases Blunt joints from a material thickness of 12 mm Mitred joints from a material thickness of 18 mm Features Dismountable: Always detachable with the rotating lever Aesthetic: the small, barely visible opening (Ø = 6 mm) serves to open and close the connector Flexible assembly sequence: Movable positioning bolts allow a freely selectable assembly sequence Versatile: the small depth of the connector allows mitre cuts of 22.5 to 180°, e.g. for surface, corner and intermediate wall connections Versatile assembly: bevelled and movable positioning bolts allow the workpiece to be moved inwards and outwards on both sides ds: dsc: kts: cabinet connectors in box (1000 pcs) kpn: CLAMEX P-14 FLEXUS kpn_dash: CLAMEX P kpn_clear: CLAMEXP14FLEXUS bkpn: LAMELLO CLAMEX P-14 FLEXUS bkpn_clear: LAMELLO CLAMEXP14FLEXUS c_path: Home / Fasteners and machine components / Fasteners / Wood joints / Biscuit joint | Home / Our brands / Lamello / Lamello fasteners and machine components / Lamello fasteners / Lamello wood joints / Lamello biscuit joint sr_no_br_cl_ns: 145317 sr_ns: LAMELLO145317
r: 03226211 p: 21.983 pid: 128616 b: LAMELLO q: 2 st: 1 lt: 1 ean: 7640129660865 sr: LAMELLO 145301 sr_no_br: 145301 sr_no_br_cl: 145301 sr_cl: LAMELLO145301 sr_dash: sold: 1406.912 p_range: none type: standard act: 1 avo: 1 av: n: LAMELLO Bisco P14 alignment slat for P-system grooves (80 pcs) - 145301 cn: BISCUIT JOIN cn2: BISCUIT JOIN cn_clear: BISCUITJOIN d: Product description Plastic slats for Clamex P and Tenso P Align furniture parts flush against each other with Clamex P Check furniture for quality with Bisco P before gluing with Tenso P All corner and mitre joints from 22.5° to 180° Bisco P-10 from material thickness 12 mm, Bisco P-14 from 16 mm Bisco P is a plastic lamella. The alignment slat fits into the P-System groove 7 mm wide, but is not anchored together like Clamex P. Instead, it clips into the groove due to its surface structure. It can be used as a wooden slat with wood glue as a fixed joint. Bisco P is used in combination with Clamex P when only every second connector needs to exert tensioning force and between them an alignment element for joint alignment suffices as an invisible and cost-effective alternative. Another application is use as a dry joint before joining a workpiece with Tenso P and adhesive. The tensile strength of Tenso P is very high and can require a lot of force during disassembly depending on the angle of the workpieces. It is therefore advisable to check the precision of the machining operations with Bisco P. Afterwards, Bisco is simply removed from the grooves, replaced with Tenso P, adhesive is applied and the workpieces are assembled. Bisco P-14 is used in combination with Clamex P-14 or Tenso P-14, Bisco P-10 with size P-10 connectors. Applications Combination with Clamex P or Tenso P in furniture construction Applications analogous to the original Lamello wooden slat Size P10: butt joints from a material thickness of 12 mm, mitre joints from a material thickness of 18 mm Size P14: butt joints from a material thickness of 15 mm, mitre joints from a material thickness of 18 mm Features Flexible combining: In combination with Clamex or Tenso, ideal for ensuring that the furniture is properly aligned. Ideal for joints before gluing or joining Low milling depth: Minimum milling depth with maximum tensile strength Sliding tolerance in the profile groove: With the P-System, both workpieces can be aligned perfectly evenly Versatile: The small depth of the joiner allows mitres of 22.5 to 180°, such as for surface, corner and partition wall joints Flush alignment: The large sliding tolerance enables perfect flat alignment of workpieces ds: dsc: kts: alignment slat for P-system grooves (80 pcs) kpn: Bisco P14 kpn_dash: kpn_clear: BiscoP14 bkpn: LAMELLO Bisco P14 bkpn_clear: LAMELLO BiscoP14 c_path: Home / Fasteners and machine components / Fasteners / Wood joints / Biscuit joint | Home / Our brands / Lamello / Lamello fasteners and machine components / Lamello fasteners / Lamello wood joints / Lamello biscuit joint sr_no_br_cl_ns: 145301 sr_ns: LAMELLO145301
